A:AnswerHi Gary- •Out of the box, the length measurements are as follows: Left side short: 21½", Left side long: 25", Right side short: 21½", Left side long: 25", Center rear: 31-1/8". Width of each trim piece is 5/8" and each can be cut to length per Installation Instructions to fit around the cooktop. Hacksaw or miter saw is recommended for cutting the side trim pieces, if needed. Mounts with special 3M Adhesive strips that are durable and heat/grease resistant. After JXFILLR1SS is installed, the range can still be pulled out if needed (for cleaning, service, etc.) because the trim is attached to the countertop, not the range. See Installation Guide: https://www.myapstore.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=31-11118_Trim%20Kit%20Instructions.pdf -
Compatible with "L" series slide-in models manufactured in (or after) Sept 2017. Explore Front Control Slide-In Ranges: https://www.geappliances.com/ge/range-stove/front-control-range.htm - Keep in touch! Sue
A:AnswerHi CODOC - Thanks for choosing Cafe! Café™ 30" Smart Slide-In, Front-Control, Dual-Fuel Range with Warming Drawer C2S900P3MD1 and Café™ 30" Smart Slide-In, Front-Control, Dual-Fuel, Double-Oven Range with Convection C2S950P3MD1 are compatible with JXFILLR1DD (Dorian Gray). Using Black JXFILLR1BB is personal preference and also coordinates nicely. Keep in touch at cafeappliances.com. Sue
A:AnswerYes, I have the GE Touch Control Induction oven. The black metal trim pieces shown, from Best Buy, work well. They are a bit expensive in part because they give you 5 different pieces in 3 lengths and you will probably only need to use 2 side pieces. But after searching extensively, and trying the cheap rubber ones, these were definitely the right solution. They look good work well and are very, very easy to apply - you just peal and stick on. They are very good quality. Give a professional finished look.
A:AnswerHi there, and thanks for this great question! We understand why you may want a filler kit, and are glad to advise. Model PHS930YPFS would not be compatible with the kit you asked this question on, but would work with filler kit JXFILLR1BB. That kit may be available from the dealer of your choice, or is also available through our Parts Department, who can be reached at 1-877-959-8688. We regret any inconvenience caused by you not being informed of the kit option when you ordered the range, and your experience will be reported to our team for review. We hope this information is helpful! If you have any other concerns or questions, we are happy to offer assistance any time. Wishing you all the best! -Sarah@GEA
A:AnswerHello- We appreciate your question and are happy to help! We don't have a white trim kit available. The black trim kit JXFILLR1DD is the one that is recommended for this model. There isn't a white option. If desired you can use a Stainless trim kit JXFILLR1SS. If you have any questions in the future, please let us know. We are here to help! Joyce@GEA
A:AnswerHi, there. Thanks for reaching out with your question! The filler kit is compatible with select ranges. Given that, we cannot confirm that it will be compatible with another brand's stove. If you are ever in the market for another stove, we hope you choose GE. We would love to have you as a member of the GEA family! Should you need any further assistance, we are here to help.- Kianna@GEA
A:AnswerI have this kit for my slide in range. There are 5 pieces in this kit. 2 short side pieces 21.5" long, 2 long side pieces 25" long, and 1 long piece 31 1/8" long. The install instructions say you can cut the pieces to fit also.
A:AnswerHi,
Good question! We appreciate your interest and we'd love to provide you with an answer. We found that this Trim Kit (JXFILLR1BB) is the correct model for your range. Let us know if you have any further questions. Take care!
-Sylvia@GEA
A:AnswerThis JXFILLR1BB trim kit is compatible with select GE Appliances ranges. To ensure compatibility, check the Accessories section in the Specifications of the product page on our GE Appliances website. You may also reach out with your model number on this product and we will be able to determine if it is compatible. Lauren@GEAppliances
A:AnswerOurs is different GE model but standard 30” width. We have quartz in back of the range and had only 1/4” gap on sides of the range. The “fillers” we bought filled the side and rear gaps nicely and “glue” the fillers in place. Worked very well for us and will do the same in any application in which the gaps are approx. 3/8” or less. Hope this information helps.
A:AnswerIt can be installed after the oven is installed. It’s probably better to install after oven install so you can butt it up to the edge of the oven.
