A:Answer The steps for descaling are:
Before you begin, you will need a large ceramic mug, fresh water, descale solution and access to a sink. Do not use a paper cup. STEP 1: FIRST DESCALING SOLUTION RINSE
• Turn on your brewer.
• Pour one third (4.6 oz.) of the Keurig™ Descaling Solution into the cold Water Reservoir then add fresh water to the 10 oz. fill level.
• Place a large ceramic mug on the Drip Tray Plate. Do not use a paper cup.
• Lift the Handle but do not add a K-Cup® pod. After 5 seconds, lower Handle and press the BREW button.
• Once solution is dispensed, discard hot contents into sink. STEP 2: SECOND DESCALING SOLUTION RINSE
• Repeat above process up until you press the BREW button.
• When BREW button turns solid red, power off as it starts to dispense.
• Let brewer stand for at least 30 minutes.
• Power on the brewer, lift and lower Handle, then press BREW button.
• Discard the hot contents into sink. STEP 3: FRESH WATER RINSE
• Repeat Step 1 (3 times) – using 10 oz. of fresh water each time.
• You may need to perform additional Fresh Water Rinse cycles if you notice any residual taste.