Questions & Answers

Q: QuestionWhat is the maximum weight that this soundbar mount can support?

• A:Answer This soundbar mount can support a maximum weight of 20 lbs.

Q: QuestionCan the soundbar mount be adjusted after installation?

• A:Answer Yes, the mounting system allows you to move your soundbar vertically and front and back for a clean look.

Q: QuestionWhat is the largest size TV compatible with this mount?

• A:Answer This mount works with TVs up to 70” and many TVs 70” – 90” with VESA mounting patterns on the bottom half of the TV back panel.

Q: QuestionHow can I obtain additional screws for the soundbar mount if needed?

• A:Answer You can call 1-800-620-2790 to obtain additional screws for your product free of charge.

Q: QuestionIs this soundbar mount compatible with a VESA mount?

• A:Answer Yes, this soundbar mount is VESA compliant and attaches to your wall-mounted TV through the TV's mounting holes.

Q: QuestionDoes this mount work with soundbars that have bottom or back mounting holes?

• A:Answer Yes, this mount works with soundbars that have either bottom or back mounting holes, including keyhole slots.

Q: QuestionAre you able to move this up and down to make it flush with the TV so they look like one piece? All the photos show a gap between the TV and soundbar. Just want to make sure I can adjust this so there is no gap. Thanks in advance!

Asked 5 years ago by Sam.

• A:Answer This has a dynamic height adjust system, all you'll need to do is lift up on the soundbar until it's flush with the bottom of the TV, there's a pull cord to release if you'd like to lower it back down. The depth of the soundbar can also be adjusted during install, so you'll be able to get the face of the soundbar and TV flush, while also having no gap between. Review your soundbar manual as well. Some soundbars recommend 4" of clearance for up-firing speakers, this will ensure optimal sound quality.

  Answered 5 years ago by Adam

  Helpful (18)Unhelpful (2)ReportAnswer this questionShow more answers (5)

Q: QuestionMy tv is already mounted on the wall, will I have to take the tv down before installing the sound bar mount?

Asked 4 years ago by Mounting.

• A:Answer My TV was already mounted on the wall, and the Best Buy Agents who came out to mount my soundbar did have to take the TV off the wall. They heard me speaking to my husband about wanting to have the TV mounted further to the right and one of the Best Buy Agents said, they could do that when they remount the TV back on the wall. The whole process took very little time. My experience with Best Buy is they're always thinking of their customers--it brings us back to do business with them over and over again.

  Answered 4 years ago by LadyMVerified Purchase

  Helpful (11)Unhelpful (1)ReportAnswer this questionShow more answers (1)

Q: QuestionI have a 55" Samsung MU8000 tv and the HW-N450 Samsung Soundbar, will this work with my setup? I have seen pictures of gaps between the tv and soundbar when using this mount, is that dependant on the size of the tv? Dont want to see the mount. Thanks.

Asked 5 years ago by Notsopopularcritic.

• A:Answer The gaps are your choice. It’s all in how you mount it. You can mount it flush or leave a gap.

  Answered 5 years ago by BillF

  Helpful (9)Unhelpful (2)ReportAnswer this questionShow more answers (1)

Q: QuestionI have an Omni Mount SC120FMX tv wall mount. Getting ready to purchase a Samsung 65" Q90R tv and a Samsung HW-Q90R/ZA Sound Bar. My question is will this universal sound bar mount connect to the Omni Mount SC120FMX wall mount and connect to the HW-Q90R/ZA

Asked 5 years ago by llewellinsetterman.

• A:Answer I looked at the Omni Mount SC120FMX online. Based on what I can see this should work with no problem. The reason is that the Rocketfish Universal Soundbar Mount is attached BETWEEN the TV mount and the television. In other words, the soundbar mount is against the TV and then you place the TV mount against the soundbar mount and run the bolts (provided with the soundbar mount) through BOTH the TV mount AND the soundbar mount. Rocketfish includes spacers for the bottom set of bolts so that everything is kept in line. It was no problem making this soundbar mount work with the Rocketfish RF-HTVMM170C Full Motion TV Wall Mount (purchased a year ago from Best Buy). I mounted a Samsung HW-R650 soundbar to it and it fits flush against the bottom of the television. It looks great and the mount is sturdy.

  Answered 5 years ago by StevoTNR

  Helpful (5)Unhelpful (1)ReportAnswer this question

Q: QuestionWill this universal soundbar mounting system work with a Rocketfish large tilt model 3 (RF-TVMLPT03) on a 65 inch LG tv, and a Samsung soundbar Q850T?

Asked 4 years ago by Corridor1.

• A:Answer It's meant to be universal so you should be good. From my experience you'll want to spot and measure your mounting holes on your soundbar (either on back or bottom of the component) and also note the proximity of your mounting brackets to the power cable inlet on the tv. I had to off-center my soundbar mounting rods because the default positioning encroached on my ability to plug in the power cable. All that said, it looks great and wasn't too hard to put together

  Answered 4 years ago by ArthurM0rganVerified Purchase

  Helpful (4)Unhelpful (1)ReportAnswer this questionShow more answers (1)

Q: QuestionMy TV is already installed on a wall bracket. Do I have to completed dismount it from the wall bracket to install the soundbar mount?

Asked 4 years ago by HarryM.

• A:Answer We had our soundbar installed professionally by the Geek Squad and the tv was completely removed from our wall bracket to do so. It looks great and it's the best way to go.

  Answered 4 years ago by PI13Verified Purchase

  Helpful (3)Unhelpful (1)ReportAnswer this questionShow more answers (2)

Q: Questionwill this work on the sony tv x90L using the ht-a5000 sounbar hung an a sanus prefered wall mount SLF428-B1?

Asked 1 year ago by dk421.

• A:Answer No. This mount won't hold the weight of anything more than a loaf of bread without sliding down. It uses a little friction clamp to hold the bar at a given level, there are no holes in the bar with screws to put through to hold it there. Its hot trash stay away.

  Answered 1 year ago by AdamSVerified Purchase

  Helpful (2)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWill this universal soundbar mount work with an LG65" OLED and a Bose Soundbar 900? I can seem to get a straight answer. Will the soundbar mount line up with the "under" screw holes>

Asked 2 years ago by whths2.

• A:Answer Yes my opinion is it will

  Answered 1 year ago by PoemonaVerified Purchase

  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionI have a samsung hw-q990c will this work with it?

Asked 1 year ago by JB.

• A:Answer This did not answer my question. I am asking if this mount is compatible with my sound bar not my tv. Is the mount compatible with the sound bar for the Samsung hw-q990c series.

  Answered 1 year ago by AnonymousVerified Purchase

  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWould this work for a sanus premium wall mount?

Asked 2 years ago by Gabriel.

• A:Answer No that's what I have actually. Just stay away. This mount won't hold the weight of anything more than a loaf of bread without sliding down. It uses a little friction clamp to hold the bar at a given level, there are no holes in the bar with screws to put through to hold it there. Its hot trash stay away.

  Answered 1 year ago by AdamSVerified Purchase

  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: Questionis this unit compatible with a Mounting Dream 42"-86" Bracket #MD2298?

Asked 2 years ago by DannyBbuy.

• A:Answer Hello DannyBbuy, This attaches to your wall-mounted TV (32"-90") through your TV's mounting holes. Rocketfish Support Louise www.rocketfishproducts.com/support

  Answered 2 years ago by RocketfishCustomerSupport

  
  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWill this soundbar mount attach to the Sanus BLT3-B1 TV mount?

Asked 3 years ago by Jen56.

• A:Answer Yes

  Answered 2 years ago by RonDonVerified Purchase

  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionI have and 85" tv, would this work with my tv to attach a sound bar

Asked 3 years ago by Chris.

• A:Answer If it’s a Samsung 85”, No. Not sure about other brands.

  Answered 3 years ago by Mousey

  Helpful (2)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWill this work with a Sonos PLAYBAR (their first generation sound bar)?

Asked 3 years ago by matt.

• A:Answer Yes

  Answered 3 years ago by OldTimer

  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)