A:AnswerIf the wireless module light is blinking blue or turns to red, it means there is no connection. What you can do is to try and reset wireless module by pushing small object (toothpick would do) through the little whole on the back on holding it for 5 seconds. After that turn off soundbar then push down and hold volume button on the remote (not switching the volume up and down, but pressing down on the button vertically) for 5 seconds to activate pairing, after a short while soundbar will turn on and if the light is solid blue on wireless module, the connection is successful.
A:AnswerOnce you have the speakers paired to your sound bar. To increase the rear speaker volume you just need to use the remote that came with the sound bar.
With the sound bar ON, push the little gear(settings) icon.
Click the button multiple times; you will see TREBLE and BASS and other sound settings, go past them until the sound bar says “REAR L” then you can use the up and down buttons to adjust the rear speaker levels to your preferred volume.
A:AnswerBefore I buy a product like this, I always download an owner's manual. Here's the list of compatible sound bars from the manual for the SWA-8500S rear speakers:
HW-M360
HW-M369
HW-M450
HW-M460
HW-M4500
HW-M4501
HW-M4510
HW-M4511
HW-M550
HW-M560
HW-N400
HW-N410
HW-N450
HW-N460
HW-N550
HW-N560
HW-N650
HW-N660
A:AnswerAccording to the owners manual for your sound bar it will work with the 8500s rear speakers.
This is line is copied from the Samsung manual for your sound bar.
["Expand to true wireless surround sound by connecting the Samsung Wireless Rear Speaker Kit (SWA-8500S) to your Soundbar (Sold separately). For more information, see the Samsung Wireless Rear Speaker Kit manual."]
You sound bar is not listed as compatible in the 8500s manual but neither are mine and they are compatible. I have three pair of these speaker in my house paired up to another Samsung sound bar and they were easy to pair and work great - you need to figure out how to set the volume up to the highest settings if you have the speakers set up at a distance from the screen. They were a real deal discounted on sale. Good luck.
A:AnswerUsing the remote for the sound bar press the settings button repeatedly to cycle thru the functions. Bass ,Treble , Rear Speakers. You can adjust the sound level from there.
A:AnswerHi, certain model variants are added after the fact and may not show up on compatibility lists. The SWA-8500 will work with the HW-510. Thanks, ^Scott
A:AnswerHi Bren! The 2020 Soundbar models that are compatible with the SWA-8500S Rear Kit are the HW-T450, HW-T550, HW-T650, and HW-Q60T. The 2020 Soundbar model compatible with the SWA-9000S Rear Kit are the HW-Q70T and HW-Q800T. The 2019 Soundbar models that are compatible with the SWA-8500S Rear Kit are the HW-R450, HW-R550, HW-R650, and HW-Q70R. The 2019 Soundbar model that is compatible with the SWA-9000S Rear Kit is the HW-Q80R. ^Gina
A:AnswerConor -First, make sure that the soundbar and the two speakers are plugged into a power source.The soundbar also needs to be turned on.Press and hold ID SET on the back of the surround speakers for at least 5 seconds. The red indicator on each speaker will turn off and start blinking blue.Press either the VOL button or the Up button on your soundbar's remote. Hold down the button for 5-6 seconds until the “ID SET” message appears on your soundbar’s display.
Note: Which button you need to press varies by model. Please read your soundbar's user manual for specific instructions.The LINK LED indicator will stop blinking and glow a solid blue when a connection is established between the soundbar and the wireless receiver. If this doesn't resolve your issue please contact 1-800-SAMSUNG for further support . ^Jason
A:AnswerYes. See below. I would buy them again for sure.
Compatible Models
Samsung Soundbars: HW-Q70R, HW-Q60R, HW-R650, HW-R550, HW-R450, HW-N400, HW-N450, HW-N550, HW-N650 HW-M360, HW-M450, HW-M4500, HW-M550
