Customer Ratings & Reviews

I recently upgraded to the TP-Link Deco BE65 Pro from my older Orbi AC3000, and the difference is night and day. The Deco BE65 Pro is a WiFi 7 mesh system boasting 11Gbps speeds, and it truly delivers on its promises. With a 1.2 Gbps ISP connection, I’d struggled to get anywhere near full speed with my old router. But since switching to the Deco, I’m consistently seeing speeds much closer or eve more than what I’m paying for. One of the standout features is how intuitive and user-friendly the Deco app is. Setup was a breeze, and managing my network has never been this straightforward. Compared to the Netgear app I used with my Orbi, the Deco app is in a league of its own. It offers more control over network settings while maintaining a clean, easy-to-navigate interface. Customizing settings for devices or adjusting parental controls is quick and painless. My Orbi served me well, but as technology advanced, it became clear it was outdated. The TP-Link Deco BE65 Pro has brought my network to a new level, maximizing my ISP’s speeds and providing much better coverage and stability. If you’re looking to future-proof your home WiFi setup, I highly recommend this upgrade!

I couldn’t be more impressed. The setup was incredibly straightforward, thanks to the intuitive app that guided me through each step. The system provides fast, reliable coverage throughout my entire home, eliminating any dead zones and delivering smooth streaming and gaming experiences even in 4K. The app makes it easy to monitor connected devices, set up guest networks, and troubleshoot any issues, making network management effortless. Overall, this WiFi 7 Mesh system is a fantastic solution for anyone looking to boost their home connectivity.

If you are looking to upgrade to Wifi 7 and looking for a dependable device at a reasonable cost, look no further than this unit. I had an RBK852 Orbi mesh system, with 2 satellites previously. Lightning hit my house, frying my orbit router. Was $250 to replace the router. Did some research for future proofing the house, and found this unit and spent the extra money. Glad I did! My wifi speeds went from 870 mbps, to well over 1,400 with a 1.2 gb plan from Xfinity. You won't receive these speeds all through house as only when directly next to modem, but even at other locations of house, still constant 500 mbps, no matter where I am, even in the back yard! This unit rocks. See speed test examples below of before and after of the Orbi unit.

TP Link Deco BE11000 are sooo easy to setup. Open the box, take out one, scan the "QR" code on the bottom, download the app, easy peasy! Doesn't matter which one you grab, they all can be the "Master" or a "Satellite". Also, it doesn't matter which RJ 45 you plug the "ethernet" cable into, they all can be a "WAN" or not, your choice. The app is super easy. Whatever the signal is you get from your "Modem", the TP Link will deliver to up to 200 devices, yippee ki-yay!

These Wi-Fi pods by TP-Link actually look like TP-rolls :) Configuring everything through the app was pretty smooth sailing. Daisy-chaining the pods by 5Gbps ethernet proved no problem, and they even represent this correctly in the Deco app. 5GHz, 6GHz and MLO work great. There's an interference analysis tool that suggests the best channel, based on what's around you. I live in the city with 20+ networks around me, and it works well. 2.4GHz range is adequate, but not as good as my previous Wi-Fi mesh which use the same locations, hence 4/5. With an iPhone 16 Pro, which is limited to 2x2 channels and doesn't represent the full potential of the BE11000, I get a nice 1745Mbps download speed. I'm pretty happy with this Wi-Fi upgrade overall, especially considering price, and have no problem recommending this product.

I purchased the TP-Link - Deco BE65 Pro BE11000 Whole Home Tri-Band Wi-Fi 7 Mesh Router System with two 5-Gig Ports (3-pack) - White to replace an older non-mesh router. Having distributed the two satellite units upstairs and connected the master unit to my modem downstairs, I have been able to greatly increase and improve the wi-fi signal throughout my home. For equipment connected directly to the master unit via an unmanaged switch, I swapped out the Cat 5 ethernet cables with Cat 6 cables to ensure that maximum internet speed could be achieved. In addition, I connected the hub for my Lutron Caseta lights to a satellite unit, rather than to the master unit, and everything seems to be working fine. I am impressed with the improved wi-fi signal and the very fast internet speeds throughout my home, maximizing the efficiency of my high-speed cable internet. I am very happy with my purchase and would highly recommend this product, in particular to eliminate any signal issues in problematic areas. The signal improvement also ensures that my Ring security cameras in my back yard are working at their most efficient capacity.

I recently upgraded to the TP-Link Deco BE65 Pro BE11000, and I couldn’t be happier. I live in a three-level house, and I’ve always struggled with weak Wi-Fi signals on the upper and lower floors. This 3-pack mesh system completely solved that issue. The setup was incredibly simple through the Deco app, and within minutes I had strong, fast, and stable internet in every corner of the house — even in places where I used to get zero signal. The speeds are amazing, and the 5-Gig ports are perfect for my wired devices. Streaming 4K, gaming online, and working from home now run seamlessly without interruptions. This system truly delivers on its promise. If you’re dealing with dead zones or inconsistent Wi-Fi in a large or multi-level home, this is the solution you’ve been looking for. Highly recommended!

Got this system to replace the default equipment with a new internet company. Everything was easy to connect the app was easy to follow for setting up the additional mesh units. I luke the notifications so i can see when new devices are added it allows me to be more kindful incase someone gets my internet password. I have 1 unit at the modem which is my router unit. It runs a hard wire to a 2.5 switch that feeds 3 computers and than is hardwired 50 ft downstairs to feed a second unit that feeds to another 2.5 switch that feeds 3 more computers. All hardwored systems get 2.3 consistent connection on our 2.5 service. we have the 3rd unit in the living room just running off wifi for cameras and tvs. As of now I have not found anything wrong with these units. they work great!

Oh my goodness this is the most amazing router/ mesh system I have ever purchased. It’s highly customizable very easy to set up one of the few that still has WPS and is fast as lightning. In addition, it’s got a matter hub and numerous no cost customizable features that make site management and parental controls a dream. connections are stable. The system is self healing. I can go on and on definitely would recommend this model.

Very fast and reliable, and no dead zones for the Wi-Fi signals

These connect so well! I'm loving being able to play my playstation on a tv upstairs with remote play! There are so many things that rely on connecting well. My router has been the bottle neck for slowing so many devices down for too long. This is easily one of the best purchases of 2024.

This is one of the best mesh system I have since it was installed automatically improve the Wi-Fi speed, it's really amazing.

I pay for 2 gb up and 2 gb down and i get those same speeds i paid for this upgrade on the tp link deco be11000 mesh wifi.

This is my first ever TP-Link wifi router of any kind and I absolutely like it's reliable signal throughout my home and yard. This TP-Link wifi-7 3 piece mesh system is awesome, so far after a week of use my speed and wifi distances have increased. I've had less disconnects from my routers after signals as well as better throughout coverage of all wifi signals. I have around 51 total wired and wifi devices in and out of my home. Ranging from wifi door locks, doorbell camera, security cameras, multiple outdoor lights, tablets phones, tvs, and AV gear alike. I have all my locks and cameras on they're own signal, then my AV gear and tablets and phones are on other networks. I wasn't aware how far TP-Link has come with they're newest wifi gear, I'm happily surprised. Setting up my mesh system was a breeze, took me around 45-60 minutes. All of my wifi devices connected to the mesh system with ease, no issues grabbing on to the signal and keeping it. I'm only using 2 of the nodes in my 1500 sp ft home, these 2 nodes give me plenty of wifi coverage. After setup there was already a firmware update that took around 5 minutes to complete. My 300mb fiber Internet runs around 370 up and 370 down. The footprint of these nodes are reasonable, around 9 inches tall by 5 inches round. I only wish they had more Ethernet outputs instead of only 2. Thankfully I have multiple 16 port switches in my home for hardwired connections. I highly recommend this wifi-7 mesh system by TP-link, im blown away by its performance and security.

I was looking forward to using the TP-Link Deco BE65 Pro as I hoped it would help me to get better WiFi coverage in my home. The room where I work and also have my gaming PC and Xbox One X has bad coverage due to distance from my existing WiFi router and two walls. I would get about 50% signal strength to my previous router where those systems sit. I received the Deco BE11000 3-pack in a timely manner and the shipping box arrived undamaged. The packaging used by TP-Link is thick and well done. The package contained 3 BE65 Pro's and 3 power cables. Initial Setup I was able to quickly get each setup. I configured/setup one at a time using TP-Links Deco app for iOS. The setup was very simple and fast. TP-Link has done a good job with the app and the setup process. I didn't have to manually configure the port to my internet gateway. This was done automatically by the Deco app. I just plugged in the cable from the AT&T 1Gb Fiber gateway to my main BE65 Pro and setup auto detected it and configured it correctly. I've previously had issues with a BE800 connecting directly to my gateway, but I didn't have that problem with the BE65 Pro. Connecting the two satellite BE65's was straight forward through the Deco app. After setup, I logged into the web interface to see about additional configuration options. Unfortunately, there wasn't a way for me to make changes through the web interface. I had to go through the Deco app to turn on additional features that I wanted. If you are familiar with the TP-Link wireless router web interface, then the BE65 Pro's web interface will look familiar. It's just unfortunate that you can make changes through the web interface. I was able to turn on all the additional features that I wanted by using the Deco app. I would like to see a firmware update in the future from TP-Link that changes the web interface so that you can choose to configure the BE65 Pro through the web interface or the app. Firmware The firmware update process is simple. In the Deco app, you can check for updates. If one is available, you can just select update and it will download and apply the firmware update. You can also turn on auto update if you wanted to. I performed a firmware update which only too a few minutes. After the update, I was able to see the app re-connect to the main BE65 Pro without problems and everything was working fine. IoT and MLO The BE65 Pro's already have the options to turn on a WiFi network specifically for IoT devices and also for an MLO network. I connected all of my IoT devices to the IoT network. I didn't have any problems connecting to and managing them using my iPhone on my main BE65 network while the IoT devices were connected to the IoT network. I have a couple of laptops that support MLO so I enabled that network and connected those systems to it. Each connected to it without a problem and I tested the bandwidth. They were getting download speeds that were just a little bit higher than they were before switching them over to the MLO network. If you have MLO capable systems/devices, the BE65 Pro's will support that. The BE65 Pro's Audio calls and video conferencing My work laptop was connected to a satellite BE65 Pro in my office. That's one of the furthest points away from the main BE65 Pro's location in my home. I experienced excellent audio and video calls when using Microsoft Teams and also when using Zoom. I was able to connect to my work VPN without a problem and network connectivity was uninterrupted throughout the work day. Ports There is a power connection port, one 2.5Gb port, and two 5Gb ports on the back of each BE65 Pro. If you have a 2.5Gb or 5Gb internet connection it will be supported by the BE65 Pro's. Performance of the port I used to connect to my gateway allowed me to get over 900Mbps when testing the speed. Since I have a 1Gbps internet connection, this is good performance of the BE65 Pro and my internet gateway. Performance Internet connection speeds were good whether I was testing it connected to the main BE65 Pro or one of the satellites, the speeds were maxing out my fiber internet connection. My Xbox One X, which is connected to a satellite BE65 Pro, was reaching good speeds when downloading updates for games and also maintained a stable low latency connection while playing Diablo IV. The same for my PC when playing Battlefield 2042. I was seeing 32ms latency in BF2042 and I was able to reach 696Mbps when downloading an update for Battlefield 2042 (from a satellite BE65 Pro). Conclusion I'm impressed with the simplicity of the physical design and the feature rich options available with the BE65 Pro. The mesh network now allows my desktop, laptops, and Xbox to get much better wireless connections to a satellite BE65 Pro while being able to get up to the max speeds of my internet connection as well as still being able to get very low latency to gaming servers. I'm happy with the BE65 Pro's and they are performing better than my previous WiFi router. The BE65 Pro will help those who are having low signal issues in remote rooms in your home. They support up to 200 devices so if a home has a lot of IoT devices such as lights, security cameras, etc., you have room to grow your IoT network with the BE65 Pro. It supports WiFi 7 so it will support the new WiFi devices coming out, so it will also cover you there. I'm happy with what TP-Link has done with the BE65 Pro. The only thing I would like to see is a firmware update so I can also configure the BE65 Pro through the web interface.

Verdict: The TP-Link Deco Wi-Fi 7 BE11000 is a powerful mesh system that offers an easy setup, blazing speed, convenient network management from the TP-Link app, and a stylish look that blends in a classy décor. In short... It's amazing! Initial impressions. The satellites are smaller than expected, and much smaller than my current Wi-Fi 6 mesh network (also with three satellites) from another brand. The units are fairly light and look nice. Frankly, the satellites we are replacing now low ridiculously big compared to the TP-Link, but we never noticed that before. We are very happy with the small size of the three units. The included “quick start” guide didn’t really include anything except directions to download the app and a color legend for the lights on the units. Setup. I initially opened the Tether app because this is how I setup the last TP-Link unit I had, but realized that I was wrong when I couldn’t find the new system. Once I downloaded the TP-Link Deco app for iPhone, setup is fairly easy and starts by taking a picture of the label at the bottom of one of the satellites. From there, the app guides the process. Of note, the first two times I tried to connect, the setup failed. I continued to click “Try Again” and then on the third (or fourth?) time it worked. No big deal. I had already plugged-in the other satellites so once the initial unit was installed, the other two units were pulled in right away. This part was very smooth. I am currently running completely wireless, but plan to setup a wired backhaul to improve connection to one side of the house that is behind a series of walls. This will allow Wi-Fi signal to push out at max speeds to the Wi-Fi cameras on that side of the house. App. The TP-Link app is good for both basic users and more technically-savvy users who want to customize their network. I really appreciate the network management options on the app, specifically the ability to name devices and understand how much data they use. I also LOVE the ability to assign a device to a specific satellite because we have three outdoor cameras that are some distance from the house, and regularly lose connection. Now, each camera is locked to the optimal satellite and connection has been much better. While I am not sure if there are performance benefits from consolidating IoT devices on the IoT network offered by the TP-Link Deco, I really like the ability to separate those devices from the others for ease of identification and management. Speed & range. Currently, the primary satellite is located in the middle of the ground floor of the house where the FIOS 1 Gbps data connection comes in. Another satellite is located on the second floor on one side of the house, and another satellite on the ground floor and the other end of the house, where I had very little signal and where I had connection problems with my floodlight camera. On a wireless only setup, I could get 400 Mbps in the rooms with the satellites, 300 Mbps in most other parts of the house, and going down to 200 Mbps 100 feet into the yard and on the side of the house with the bad connection. While I am very happy with these speeds, I will use a wired backhaul to get me to 400 Mbps everywhere in/near the house. Wired connection to the router gave me over 900 Mbps. Things I like: - Wi-Fi 7 speed, lower latency, and better security - Super fast 6-stream tri-band Wi-Fi - Simultaneous wireless and wired backhaul capability - Dedicated IoT network - Ability to run a VPN server so all devices are protected - Connect up to 200 devices - Two 5 Gbps port for hard-wire max speed for gaming and 8K viewing - Mesh capable so you can add to the included three satellites to expand your network and get seamless service from room to room - Fast connection, even 100 feet outside the house, line of sight to an area with a satellite - The app contributes to the strengths of this system - Small footprint and elegant design - Backwards compatible (no issues encountered with any of our devices at home) Things I don’t like: - Only three wired connections on the back of each unit. When adding a wired backhaul, you lose one or two more ports, plus the connection to the modem, on the primary satellite. This is only a minor inconvenience for us because we exceeded the capacity of routers long ago and have everything coming off a 10-port switch (security system, camera base station, VOIP phone, other wired connections), but could be a factor for others - The font in the “quick start” guide is too small. And the quick start guide is only mildly useful with the legend for the light colors, otherwise not helpful Overall, this is a fantastic Wi-Fi system that provides speed, range, and a boatload of features. I most highly recommend the TP-Link Deco.

This is my first mesh set! I have been wanting to have a mesh unit for a very long time; as I have heard that it benefits all the dead zones in the home. As I received my TP Link BE11000, I thought that the setup process would be complicated and difficult. However, I was surprised to see that the setup instructions were simply enough to understand. One thing I will say, definitely take your time during the setup and do not try to rush through it. Rushing through will have you thinking that the TP Link BE11000 unit are not working properly. To properly install the units you have to download the app for the mesh unit; it guides you through the process. The deco app is great! Once I fully installed all of my deco units; the app allows me to be able to have full control of all the units. I can see if each unit is working properly, if they are all online or offline. I can install software updates for my units; see what devices are connected to deco mesh units. I can block any unknown devices that try to connect to my deco system. I love how secure my deco mesh unit is! I have great internet however, with there being 20 or more devices at home; the connectivity tends to be not so great. The kitchen, living room, and bathroom; with our devices connected only to the router, it limits us in those dead zone areas! Now, with the TP Link BE11000 deco mesh unit; we can freely walk all over our home from room to room and have high speed connection. I no longer have to worry about getting constantly booted out of the wifi. So far, having the deco unit have proven to be beneficial to have in our home. With what we pay for the internet even if we were to upgrade it, the dead zones would not be covered. We would end up paying much more per month only to be left disappointed; still not having good connectivity in the dead zone areas in my home. Overall, I am super satisfied with my TP Link BE11000 deco unit; it has exceeded my expectations. It is truly worth having in any home, that has a lot of devices and dead zone areas. I can honestly say, I have experienced such a difference in the connectivity at home no matter what area of the home I am in! To me that alleviates so much, I utilize my devices for everything. I'm happy with my mesh system; I would recommend it to anyone that experienced the issues of connectivity that I had! As well as anyone wanting to experience high speed connection at it's finest in their home.

I had set up a TP-Link Deco system for my parents a few years ago and was a fan at how easily it allowed for a wired backhaul connection which was important for their house. It's worked flawlessly ever since so when it was time to upgrade my own system (we've had our current tri-band mesh system for over 5 years so it was time), I had the Deco system at the top of my list. We have 500/500 Fiber Internet and frequently watch 4K HDR shows via streaming so we demand the best of the best from our routers. I knew I wanted a three unit mesh system that included the latest WiFi Standard 7 as well as all currently available transmissions (2.4, 5, & 6 ghz). This system had all of that and has been excellent. Overview Setup was overall a breeze, though I did have a hiccup with initially connecting my phone to the "main" Deco unit inside the Deco app. It kept saying it couldn't connect to the Deco's Wifi even though I had manually gone in and connected it and my phone was definitely connected. It just took some persistence and trying it over and over a few times. It was annoying, but a small inconvenience and it must've just been a glitch because eventually it did connect properly and after that setting up everything else including the two satellites was a breeze inside the app. (Keep in mind there are NO instructions for setting these up because you have to use the Deco app and the Deco app will step you through everything.) Once set up, these have worked great. I have all three frequencies setup with the same name/SSID and devices are correctly connecting to the best one for them. My iPhone 15 Pro Max generally connects to the 6ghz for the fastest speed which is awesome. My entire house and yard is now covered with super strong signals and fast Wifi. Our house is only 1400 sq ft so I have two routers in there - the third is in our garage which is next to our pool and helps cover the backyard pool area. We have just under 100 devices connected as we use a lot of smart devices that are always connected and everything connected fine and haven't had any issues. I couldn't be more pleased with how these are working. It's really taken our WiFi system to the next level. PROS - Fairly Affordable for the Quality/Specs (when compared to the other top brands of equal specs/ratings I would consider) - Excellent WiFi on all 3 bands - 2.4, 5, & 6 Ghz - Supports the latest WiFi 7 protocol - Brilliant App with easy to use User Interface that makes setting things up and monitoring everything simple - Tri-Band Connection between main router and satellites works great to ensure fast WiFi everywhere in our house/yard - Routers are small and look nice - Everything connects and stays connected and gets great speeds CONS - Bit of glitch in initial setup where the app couldn't recognize that my phone was connected to the Router - Main router will only have 2 available ethernet connections for hardlining (but easily & inexpensively fixed by connecting a switch). Satellites will have 3 available. If you're looking for one of the best systems you can get, that is fairly easy to set up with all the options you could want in a mesh router system, a great app with intuitive user interface, and excellent functionality, then I would definitely recommend this TP-Link Deco system!

This is my first ever setup of a mesh network. I've been wanting to get one for years now because of the benefits they bring versus a single router or hard to setup extenders. This system is awesome! The only documentation that came with the setup is a small Quick Installation Guide that is basically a QR code to download the app that will then walk you through setting up the system. The setup was fairly straight-forward, but I did find myself a little overwhelmed in a couple spots. There are some questions about your ISP that I wasn't sure about and never had to worry about with previous routers, but thankfully the defaults worked! After getting through the initial setup of the primary unit to my internet connection, it could not find the internet. I went into the app and rebooted the router and was very pleasantly surprised that it then was able to connect to the internet. It's possible it just needed a little more time to pickup the information it needed from the ISP. Once the main unit is setup, then it walks you through placing the other 2 satellite stations. I was pleasantly surprised when they automatically connected to the mesh by just plugging them in. I didn't need to do any additional setup. They appeared in the app with a nice diagram of the network. I had a fairly nice Linksys single router previously and it definitely struggled to cover my entire house and my house isn't huge. Having the mesh network removes all the dead / low signal spots I had previously which I'm loving! My streaming devices and TV's have great signal now in every room. The app that installs on the phone is very feature rich and lets you do all sorts of things with your new equipment! One thing that was SUPER nice is the network optimizer. It analyzes interference from outside WiFi networks or appliances and finds the best channels for all your networks. 2.4 Ghz, 5Ghz, 6Ghz and shows you what channel it was before optimizing and what channel it picked afterwards. Definitely keeps things running as smooth as possible when you have neighbors! There is a convenient Speed Test function that uses speedtest.com, how many devices are connected and to which satellite, how much data and speed is being transferred in real-time. You can setup a special IoT network for keeping all your internet of things devices on to keep them off your primary network which is REALLY nice. I've been looking for a way to better protect my network from those sometimes insecure devices and now I have it! It supports a Guest network and sets up a 6Ghz network during setup. You can also run a VPN Server through the software for remoting into your home network or a VPN client to protect you on remote networks. There are advanced settings that are over my head that one can play with as well like Fast Roaming, Beamforming, and NAT forwarding. Beyond my needs, but the advanced features are there if you do need these! You can setup notifications when either new or existing devices connect to your network which is nice. The alerts can be Push Notifications or Email alerts. The application also has Parental Controls for the kiddos. I don't have children myself so I do not have much need for this, but it's there if you need it! It also comes with a 1 month trial of HomeSheild premium that adds extra layers of protection from outside threats, statistic reports, VPN, antivirus, IoT Protection, Intrusion Prevention and Web Protection. You have Basic which is free, then yearly or monthly rates for either Security+ or Total packages and the rates are really reasonable. Just a few dollars a month for either plan. Definitely helpful in keeping your network safe from hackers! The system automatically keeps the hardware running the latest firmware updates which is really nice as every other router I've ever owned has made this a manual and somewhat cumbersome process. This is set it and forget it! The 3 units themselves seem well constructed and solid. Each having 3 network jacks and a USB port for USB sharing. Each one has a little status LED at the base which is pretty minimal, but if lights bother you the app lets you turn off the lights or schedule times when they are off. These mesh network setups are a bit on the pricey side compared to your normal router setups obviously, but if you want a network that is without signal problem areas around your house and has great features in an easy to use app on your phone, then it's definitely worth the extra cost! I am loving this setup so far and would definitely recommend it to a friend looking for a better wireless network setup!

Although Wi-Fi 7 devices are not yet readily available, TP-Link has positioned themselves as an early-adopter of Wi-Fi 7 devices for both home and office. So the logical question here is: Do I need Wi-Fi 7? The easy answer is - if you like speed - Yes you need Wi-Fi 7. I use an Apple iPhone for my personal device. I have an iPhone 14 Pro. However, it does not support Wi-Fi 7 or even W-Fi 6E for that matter. Most device including the iPhone 11 and newer only support Wi-Fi 6 - not 6E or 7. It is rumored that the iPhone 16 Pro will have Wi-Fi 7 capabilities - and you'll notice the difference. Moving from Wi-Fi 5 to 6 only provided incremental benefits. OK - enough on Wi-Fi. Know that version 7 is better and faster, yet currently not many devices is support it. So if you want to be future-proofed, get Wi-Fi 7 now. The biggest gains are for gamers at home - with a substantial boost for in-home networking speeds. I saw it personally on my device as well. So if faster speeds are what you're after - maybe its better security? In this upgrade TP-Link has enhanced their security software HomeShield to version 3.0, adding more features and 2 exclusive apps for comprehensive protection. Protect Comprehensively - HomeShield provides comprehensive advanced security features. Advertisement blocker blocks annoying ads and pop-ups and prevents data tracking. Intrusion protection protects your home network and applications against external attacks and eliminates vulnerabilities. For those with higher security requirements, HomeShield provides VPN Client. Protect All Devices - HomeShield protects all kinds of home network devices, including phones, computers, TVs, game consoles, and other IoT devices. Protection starts instantly once they connect to the gateway. Simply configure the gateway and achieve whole-home network security. Protect Everywhere - Unlike most network security services that only work at home, HomeShield maintains its safeguards away from home. With pre-installed apps, your kids' mobile devices remain secure and under parental control on the go. Parents are able to monitor apps on their kids' phones, further manage payment methods, and monitor their screen time for a safer and better online experience. Overall - I'm really liking this Wi-Fi mesh solution and have been totally impressed with the ease of setup and speed while using. I'm looking to supplement it with some TP-Link cameras now too!