HYTE - Y60 ATX Mid-Tower PC Case - White

This y60 case is a fantastic case that has plenty of build room for power builders, new builders, or hobbyist. This case will easily fit a 4090 GPU, full atx mobo, has room for 360 water cooled cpu on top, a cool riser that allows the GPU to be vertical instead of horizontal like most cases, and has plenty of zip ties to do cable management. My Asus water cooled system keeps my cpu around 35 C in this case with a Ryzen 9 7000 series. Running this with an Asus mobo, 64 GB of G-skill ram, Asus 4070ti GPU, corsair 850RX PSU, 3 - 2TB samsung 980 SSD's, and Halo fans in the case. This is the y60 case with no screen or you can buy the y70 case with a screen in the corner that is touch screen. You can also buy a screen to put in this case if you would rather do it yourself. Really the only complaint I have about this case is the PSU room and wiring around the PSU is really tight. You are still able to get in and plug things in, but it is hard.

Great case, very sturdy and tons of room. This is my most fun build ever with its unique design, can't wait to get the liquid cooled 4090 in there to finish the look and some Star Wars flair in it. However, in all of its glory (this really is the best case I've ever worked with) I have to knock one star off because the GPU did not seat fully when installed properly as the case is designed. I had read about this so i tested with a cheap 3060 just in case, and sure enough the PC fired up, i was able to set up BIOS and update firmware, but on restart the screen started to flicker just as i was selecting boot drive to install windows... i shined a flashlight under the card and sure enough it had backed out since initial install when i seated it fully. This case is not for the faint of heart as you see in my photo, you have to hack up the back pretty good to get proper function. On top of this, i was able to plug in the top display port barely but the ports are blocked as well! So that whole bar needs to be trimmed as well, later as i don't have my dremel with me.. But great job HYTE on literally EVERYTHING else about this case, great cable management and LC radiator support and install, tons of room to get your hands where you need them.

I originally bought this case to be able to fit my rtx 4070ti, since my old case wasnt big enough (Corsair 4000x). What I did not expect was how MUCH room there was in the case. I really liked the layout in the back of the case with plenty of room for cables. And the frot angled panel design is definitely something fresh and modern. This case definitely adds asthetic to my setup. But my most favorite part is the vertical GPU mounting feature. A bit on the expensive side but still worth it, if this is what you're looking for!