Questions & Answers

Q: QuestionWhat is the height of the JX827SFSS 27" trim kit. Outside edge hight, not opening height.

Asked 4 years ago by Robin.

• A:Answer Hello, thank you for your question. The outer dimensions of this trim kit are as follows: 16-1/2" x 26-7/8" (HxW). We hope this helps! Please feel free to reach out with any further questions. -Chris@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionHello, I have a GE Profile Microwave model PEB1590SM2SS that needs to be replaced. What model Microwave and trim kit can I use as a replacement? Thank you!

Asked 4 years ago by SoCalChuck.

• A:Answer Hello, thank you for your question. In this case, we recommend PEB9159SJSS as it can be purchased with a 27" or 30" Stainless Steel Trim Kit and features similar dimensions to your current unit. We hope this helps! Please feel free to reach out with any further questions. -Chris@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWat size is inside of this item

Asked 4 years ago by Tomas.

• A:Answer Hello, thank you for your question. The interior frame dimensions for the JX827SFSS are as follows: 24.3" x 11.5" (WxH). We hope this helps! Please feel free to reach out with any further questions. -Chris@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI bought GE microwave PEB7227ANDD and 27" trim kit JX7227SLSS. One response from GE says the right trim kit is the 27" JX7227DLBB and one says it's the 27" BUILT-IN Trim Kit JX7227SLSS. Will JX7227SLSS work with PEB7227ANDD?

Asked 4 years ago by JAB.

• A:Answer Hi there - Great question! The only difference between the two trim kits are the colors. Trim kit JX7227SLSS is compatible with your microwave and is stainless steel. We hope this helped clear some confusion. Thanks so much for checking! -Mikayla@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWhat are the width and height dimensions of the JX827sfss trim kit? We have to replace a space saver II and the trim dimensions for that were 26 1/8 x 16 1/4. The outside max dimension of the cabinet is 26 3/4.

Asked 4 years ago by Lindy.

• A:Answer Hello there! Thanks for your question. We found that the dimensions of this trim kit are 16 1/2" H x 26 7/8" W. If you have any further questions, feel free to reach out to us at our social pages. We hope this helps! Emily@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI purchased PEB7226SF1SS w 27" trim kit in 2015. Need to replace microwave. Trying to find one that will fit cutout in wall. PEB9159SJSS has closest dimensions. I don't have the model # of original kit but wondering if it will also fit the PEB9159.

Asked 4 years ago by willitfit.

• A:Answer Hi there - Great question! We believe that PEB9159SJSS will make a wonderful replacement. To insure that the trim kit fits the microwave and provides the proper air flow it needs, you will have to purchase a new trim kit. The part number for PEB9159SJSS's matching 27" trim kit is JX9152SJSS. We hope this helps. Thanks so much for checking! -Mikayla@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWe are having our kitchen remodeled and purchased GE m/n-JES1657DM/SM I have not been able to find a trim kit 1-Is there one available? 2-If not, what GE microwave has the same dimensions as the one I purchased that would be compatible with a trim kit?

Asked 4 years ago by mmmroesy.

• A:Answer Hi mmmroesy, thanks for reaching out! 1. No, this model does not have a trim kit associated with and therefore is only meant to be installed via a countertop. 2. The model that has the most similar dimensions to your unit, and has a trim kit to allow for being built in, would be model: PEB9159SJSS. The trim kits for this new model are as follows: JX9152SJSS & JX9153SJSS. We hope that this helps! Stay safe. -Michael@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionHello. We just purchased a GE PEB7227AN3DD built-in microwave. Will this trim kit work on this microwave?

Asked 4 years ago by Tailwind.

• A:Answer Hi Tailwind - Thank you for reaching out to us. We are so glad you checked. This is not the correct built-in kit for your model microwave. The kit you need for a 27" installation is the JX7227SLSS and for the 30" installation JX7230SLSS. We hope this helps! Vikki@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWe are replacing a GE Profile model PEM31SM4SS -bought a PEM31SFSS to put in the same space. Is that right? We had no idea that a trim kit was needed- what size would you suggest? Our dimensions for the space are 24W, 14 1/2 H D 11 1/2 . thanks!

Asked 4 years ago by Elaine.

• A:Answer Hi Elaine! Thanks for reaching out to us. We appreciate your loyalty to GE Appliances, and we'd love to assist you. The trim kit should be based on how wide the space is you're trying to fill. We found that JX827SFSS, is the appropriate trim kit for your microwave oven if you are filling a 27" wide cavity. If you are trying to fill a 30" wide cavity, then JX830SFSS is the appropriate trim kit. You can find a link to the 30" kit below: https://www.bestbuy.com/site/30-built-in-trim-kit-for-select-ge-microwaves-stainless-steel/4395303.p?skuId=4395303 We hope you're enjoying your new GE Appliance. If you should have any more questions or concerns, please ask! Thank you and have a wonderful day! -Sylvia@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionDoes this trim kit fit GE model PES 7227 2.2 cubic ft microwave

Asked 4 years ago by Anonymous.

• A:Answer Hi there, thanks for your question! The PES7227 model of microwave is not able to be built into surrounding cabinetry with a trim kit. It is only meant to be installed on a countertop. We have not tested or approved a built in style of installation with this model. We hope that this helps! Stay safe. -Michael@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: Questionwill this kit fir a JES2051DNBB

Asked 4 years ago by wiggle.

• A:Answer Hi wiggle, thanks for reaching out to us. This microwave is actually not built-in capable so it won't be compatible with any trim kit. If you have any other questions or concerns, you can e-mail us using the Contact Us page on our website and a member of our team will be glad to help. - Guy@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI’m looking for a stainless steel trim kit to fit my GE Profile Microwave model PEB7227SLSS. Could you recommend something please?

Asked 4 years ago by Kikat.

• A:Answer Hi Kikat - Thanks for reaching out to us and for choosing this built-in sensor microwave for your home! We appreciate your interest in a built-in trim kit and are happy to direct you on this. The proper Stainless steel trim kits for your model are either JX7227SLSS 27" trim kit or JX7230SLSS 30" trim kit. Please feel free to reach back out to us if you have any additional questions about choosing a trim kit or installing it in the future. We are always happy to help! -Eliza@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWe just purchased a ge PEM31SF4SS microwave to replace our ge JEM31SF01 that died. Can we use the same trim kit from our older model? Fingers crossed!

Asked 4 years ago by Janette.

• A:Answer HI Janette! We appreciate your question. We found that you cannot use the same trim kit for your new unit. We're sorry for any inconvenience that this may cause. The kit that you will need is part number JX827SFSS, which is the 27" trim kit, or part number JX830SFSS, which is the 30" trim kit. We hope this helps! Emily@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: Questionhave a model jkp9osiss microwave will the kit on this fit another ge microwave

Asked 4 years ago by Anonymous.

• A:Answer Greetings, We appreciate you reaching out. We're happy to answer your question. The kit on that microwave will not fit other models. This is because trim kits are built to be compatible with specific model microwaves. We hope this helps. Mike@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI’m replacing a built in microwave. The opening is 15” x 25” x 19”. Inside the cabinet has 16.5” of clearance. The trim kit outside dimensions cannot exceed 17.5” x 28”. The microwave looks to be: Model:ZEB1227SLSS. Will JX827SFSS work as the Trim Kit?

Asked 4 years ago by Bill.

• A:Answer Hello Bill, Great question! We appreciate your interest in GE Appliances. We are always more than happy to help. We do not suggest using JX827SFSS as the trim kit. We found that ZX2127SLSS is the most compatible trim kit for the ZEB1227SLSS model microwave oven. It matches the dimensions you specified, and it is manufactured specifically for this model. This information can be found on the product page, under the features section. If you have any more questions feel free to contact us through our website or on social media. Thank you for choosing GE Appliances! -SylviaGEA

  Answered 4 years ago by GE Answers

  
  Helpful (1)Unhelpful (1)ReportAnswer this question

Q: QuestionI just purchased a GE microwave model JES1657SMSS to replace an old SpaceMaker II. I find this new model is meant only for countertop use. What similar model would fit in my cabinet dimensions 25"W x 15"H x 17.5"D and what trim kit?

Asked 4 years ago by Lindsey.

• A:Answer Hi Lindsey - Thank you for reaching out and for your patience! We truly appreciate you choosing a GE microwave to replace your current model and are sorry to hear that the model you purchased is not a compatible replacement. We understand that this can be a confusing process and are happy to offer you guidance in this. While there is not a specific replacement for the SpaceMaker II series models, we usually recommend the PEM31 series countertop models, as they have similar dimensions and can be built-in using a compatible trim kit. - Assuming you are looking for a Stainless Steel appearance, we would recommend the PEM31SFSS model, which can be installed using the JX827SFSS (27") or JX830SFSS (30") built-in trim kit. If you would like to learn more about this model as a replacement for your microwave, please reach out to us via our Contact Us page online with the full model and serial numbers for your current model, as well as your name, address, phone number, current email address. We are always happy to help! -Eliza@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionI just purchased a GE microwave model JES1657SMSS to replace an old Spacesaver. The cabinet dimensions of the opening are 25"W x 15"H. Will this work? Also, what are the dimensions of the trim itself at top, bottom, and sides.

Asked 4 years ago by Lindsey.

• A:Answer Hi Lindsey, thanks for reaching out to us and congratulations on the purchase of your new microwave! We'll be happy to assist you. This microwave is actually not compatible with any trim kit. It is manufactured for countertop installation only. The dimensions of this trim kit are 16-1/2" x 26-7/8", but for future reference you should note that trim kits are model specific. We hope this is useful information to you. If you have any other questions, you can reach out to us via e-mail through the Contact Us page on our website and a member of our team will be glad to help. - Guy@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI intend to replace my JE1640AB microwave with PEB7227DLWW. Is the built-in trim kit JX7230DLWW compatable with the PEB7227. My JE has a 30 inch kit.

Asked 4 years ago by Bill.

This question was asked about the related product: 27" Built-In Trim Kit for Select GE Microwaves - White

• A:Answer Hi Bill! Thanks for reaching out to us. We found that this trim kit is not compatible with model number PEB7227DLWW. The trim kit for this unit is part number JX7227DLWW and can be found online at this link: https://www.bestbuy.com/site/ge-deluxe-26-9-trim-kit-white-on-white/6083599.p?skuId=6083599 We hope this helps! Emily@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWe are replacing our PEB7226sf1ss with PEB7227ANDD. We want to keep the stainless steel look on the trim cap. Is this the correct set up for our built in microwave?

Asked 4 years ago by Pradacowgirl.

• A:Answer Hello Pradacowgirl! Thanks for reaching out to us. This would not be the correct trim kit for model number PEB7227ANDD. The stainless steel trim kit for this unit is part number JX7227SLSS and can be found online at this link: https://www.bestbuy.com/site/ge-27-built-in-microwave-trim-kit-stainless-steel/6083589.p?skuId=6083589 We hope this helps! Emily@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI am looking at purchasing the GE Microwave Model #PEM31EFES and wanted to buy a Trim Kit. My cabinet opening is 15" H by 24 3/4" Wide. The old trim kit that I am replacing is 16 1/2" H and 26 1/4" wide. What is the height of this Trim Kit?

Asked 4 years ago by Microwave.

This question was asked about the related product: GE - 26.9" Trim Kit for Microwaves - Slate

• A:Answer Hi there! Thanks for your question. The dimensions of this trim kit are 16-1/2" H x 26-7/8" W. We hope this helps! Emily

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question