1-3 of 3 Answers
Put one Actiontec in your room, the other one near your 4 port hub. Assuming you have your 4 port hub as your "router" which is then plugged into your Cable / DSL model??? Is it a 4 port like Wireless Hub? If all you have is 1 of these you can't do squat. Need 2. One has to be plugged into your router so it can route the requests from all your other "power adapters" in the building. Then you put one in each room that you want to use them. If you have 5 rooms, you need 6... 3 you need 4 and so on.
Sorry, there was a problem. Please try again later.You need two of these to establish a powerline network. One in the location where the Internet comes into the house. Another in the remote location, in your case, the bedroom. No hub or switch required on the bedroom end. Just plug the device directly into the powerline adapter. (unless you have more than one device, in which case, you need a switch) You do need a router on the end where the internet connection originates. That powerline adapter must plug into the router or switch via ethernet cable to feed the internet into the powerline network.
Sorry, there was a problem. Please try again later.You need two power line adapter. One connected to your router thru ethernet cable and another in your room. Then in your room you can connect one device thru an ethernet cable or get connect more with the 4 port hub. Don't expect to much speed, is going to be dramatically reduce by the power line, but works!
Sorry, there was a problem. Please try again later.