“I can't figure out how to connect this box to my TV the instructions make no sense I will have to return it unfortunately.”
Answer This Question
1-5 of 5 Answers
You need to have a short black cable going from the box to the antenna input on your tv, then hook your antenna be it a outside or inside antenna to the box directly for local channels.
Sorry, there was a problem. Please try again later.I agree with you that the instructions leave a lot to be desired. I am using an over the air antenna with coax cable. The antenna plugs into the "RF in" plug on the back of the converter box. I decided to use a HDMI cable to connect to the TV. Plug the cable into the HDMI out port on the converter box and into the proper port on your TV. Switch your TV to HDMI and go to the menu on the converter box. I used the auto search option on the channel search menu to find the channels available. Hope this helps!
Sorry, there was a problem. Please try again later.I had the same reaction. I got it connected but could not program it. Directions were totally useless.
Sorry, there was a problem. Please try again later.Try using RCA cables it worked for my 2016 vizio p series tv hdmi wouldn't connect.
Sorry, there was a problem. Please try again later.This DVR is only able to record Over The Air channels. From your antenna cable, use a splitter to run one COAX cable to the DVR and the other COAX cable to the antenna input on the TV. Also, use an HDMI cable to connect the DVR to the TV. Then you can record one OTA channel while watching another and use the HDMI input to watch the recording.
Sorry, there was a problem. Please try again later.