Questions & Answers

Q: QuestionHow long does it take to fully recharge the power station from solar?

• A:Answer With a 600W solar input, it takes 1.8 hours to fully recharge the power station.

Q: QuestionWhat is the maximum wattage this power station can handle?

• A:Answer The Anker SOLIX C1000X power station has a maximum wattage peak of 2400 watts.

Q: QuestionDoes this power station have a built-in light?

• A:Answer Yes, the power station has a built-in LED light with three brightness levels and an SOS mode.

Q: QuestionCan I use this power station to power my refrigerator?

• A:Answer Yes, the Anker SOLIX C1000X can power 90% of your appliances, including refrigerators.

Q: QuestionHow many times can the battery of this power station be cycled?

• A:Answer This power station uses INFINIPOWER technology and has a battery cycle life of over 3,000 cycles.

Q: QuestionWhat solar panel works best for this power station?

Asked 9 months ago by PeaceMom.

• A:Answer Any 11-60V solar panel with an XT-60 female connector can charge the C1000X. For best charging, we recommend you consider Anker PS100, PS200 or PS400 solar panels. They all are compatible with the C1000X. The C1000X accepts maximum 600W solar input. You can connect to it with up to 3* 100W solar panels, or, 3* 200W solar panel or up to 2* 400W solar panels via the supplied MC4-XT60 cable.

  Answered 8 months ago by Anker Team

  
  Helpful (4)Unhelpful (0)ReportAnswer this question

Q: QuestionWhat accessories go with this and how do u charge it

Asked 11 months ago by Tee.

• A:Answer It has an AC Charging Cable 120cm、Car Charging Cable 300cm and Solar Charging Cable(1 to 2)170cm. It can be charged by solar charging、AC charging and car socket charging

  Answered 10 months ago by Anker Team

  
  Helpful (5)Unhelpful (2)ReportAnswer this questionShow more answers (1)

Q: QuestionWill this power a standard home refrigerator? If so, about how long without a recharge? Thanks.

Asked 10 months ago by cobra.

• A:Answer Yes, this can power a full size refrigerator for up to 14 hours of consistent use.

  Answered 10 months ago by VER1TAS

  Helpful (3)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionPost is for f2600 but received a c1000x with half the watt hours listed in this post. Is this expected. I ordered the f2600 but received c1000x.

Asked 6 months ago by Mike.

• A:Answer Did they honor your purchase?

  Answered 6 months ago by Anonymous

  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionCan this be recharged using a gasoline powered portable generator?

Asked 8 months ago by buysalot.

• A:Answer Dear customer, thank you for your interest in our products. As long as gasoline powered portable generator outputs Pure Sine Wave, it can be used to recharge the C1000X.

  Answered 7 months ago by Anker Team

  
  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionCan it power a small microwave efficiently

Asked 1 week ago by Good.

Q: QuestionDoes this come with the solar panels or do you buy them separately?

Asked 3 weeks ago by CathyF.

Q: QuestionCan this run a Rockville PA system?

Asked 1 month ago by Thechamprf.

• A:Answer The C1000 has a maximum output of 1,800 watts. If your Rockville PA systemr's power requirement is less than 1,800 watts, then the C1000 can power it. However, if the Rockville PA system's power consumption exceeds 1,800 watts, the C1000 will not be able to support it. To ensure compatibility, we recommend checking the wattage or power rating of your Rockville PA system, which is usually listed on the appliance's label or in its user manual.

  Answered 3 weeks ago by Anker Team

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill the app monitor the ambient temperature and send an alert when it is nearing a threshold? I'd like to store this in my shed and would like to know if it is getting too warm or too cold so I can bring it inside and not damage the unit.

Asked 5 months ago by Petey.

• A:Answer Dear Petey, thank you for your question! The app does not monitor the ambient temperature, but it does monitor the battery cell temperature. If the battery cell temperature exceeds the safe threshold, the app will trigger a temperature alert. While it won't directly notify you of the shed's ambient temperature, this feature helps ensure the unit's safety. If you have any further questions or concerns, feel free to reach out!

  Answered 5 months ago by Anker Team

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionDoes it come with a solar panel?

Asked 5 months ago by Adam12.

• A:Answer No. But you can use any generic solar panel with MC4 connection as long as the voltage is within the range

  Answered 1 month ago by YangVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionCan I connect 2 of these together to increase power?

Asked 6 months ago by Farmerkev.

• A:Answer Is it expandable

  Answered 1 month ago by Anonymous

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionCan this run a coffee maker and a heating pad?

Asked 7 months ago by Grammy.

• A:Answer Dear friend, as long as your coffee maker and the heating pad do not exceed a maximum power of 1800W, they can be connected to the AC output outlets of the C1000X.

  Answered 6 months ago by Anker Team

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionHow long can you run a 1500 watt heater on this?

Asked 8 months ago by Heaterguy.

• A:Answer Dear customer, thanks for your inquiry. If the peak power consumption of your heater is 1500W max, with 1056Wh battery capacity, the C1000X can last around 34 minutes to run the 1500W heater. If the peak power consumption of your heater exceeds 1800W, then the C1000X may not meet your needs. But you can take a bigger model such as, F2000, F2600 or F3800 into consideration.

  Answered 7 months ago by Anker Team

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionDoes this unit require an internet connection to monitor grid and transfer power when grid power fails.

Asked 8 months ago by Joe.

• A:Answer Dear customer, thank you for your inquiry. It does not require an internet connection to monitor grid and transfer power when grid power fails. The C1000X will automatically switch from grid power to batttery power during power outages.

  Answered 7 months ago by Anker Team

  
  Helpful (0)Unhelpful (0)ReportAnswer this question