Questions & Answers

Q: QuestionWill this work with a Sanusi F DR35?

Asked 6 months ago by Anonymous.

Q: Questionwill this work on 120 turn table

Asked 7 months ago by Anonymous.

This question was asked about the related product: Audio-Technica - Audio Technica AT-VM95E/H Headshell/Cartridge Kit - Green

• A:Answer Yes, it will.

  Answered 7 months ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this fit a denon 47f straight arm

Asked 9 months ago by Anonymous.

This question was asked about the related product: Audio-Technica AT-VM95C/H Headshell/Cartridge Kit - Blue

• A:Answer It will not. You can use the cartridge itself, the AT-VM95C, but not the headshell that comes with the AT-VM95C/H Headshell/Cartridge Combo Kit. Your turntable has a straight tonearm and an angled headshell, you must use the Denon angled headshell.

  Answered 9 months ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this fit a Dual 506 turntable?

Asked 11 months ago by BJ.

• A:Answer It will not, not the headshell anyway. You may use the cartridge only, the AT-VM95EN, but you must use the Dual headshell and Dual cartridge mounting plate.

  Answered 11 months ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this cartridge/headshell work on my MCS683-6500? It previously had a AT cartridge which was yellow but did not show any numbers. The turntable has no pre-amp and I have it paired with my Marantaz AVR. Thanks.

Asked 1 year ago by Davey.

This question was asked about the related product: Audio-Technica - Audio Technica AT-VM95E/H Headshell/Cartridge Kit - Green

• A:Answer You may use the AT-VM95C Cartridge on the existing MCS headshell, but we cannot confirm that the AT-VM95C/H Headshell/Cartridge combo Kit will work on the MCS tonearm. The provided counterweight would need to have the ability to counterbalance a total of 15.5 grams (combined headshell + cartridge weight).

  Answered 1 year ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill it fit my Audia Tecnicka60 turntable

Asked 1 year ago by Turntable.

• A:Answer No, it will not. Only the stylus (needle) is replaceable on 60 Series turntables.

  Answered 1 year ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this work/compatible with Marantz 6350q turntable? Manufacturers states 18mm overhang. Thank you.

Asked 1 year ago by LPspinner.

• A:Answer Yes

  Answered 1 year ago by Anonymous

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWill this fit on a Sony PSX55S turntable?

Asked 1 year ago by Christo.

This question was asked about the related product: Audio-Technica AT-VM95C/H Headshell/Cartridge Kit - Blue

• A:Answer You can use the AT-VM95C Cartridge, but not the AT-HS6 headshell. You must use the Sony angled headshell that was provided with your turntable. The AT-HS6 Headshell is straight..

  Answered 1 year ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWhat replacement stylus would be recommended for Dual Turntable CS 1268; I have a Shure Stylus 600H 45 HE now. Thank-You.

Asked 1 year ago by BoyBill.

This question was asked about the related product: Audio-Technica AT-VM95C/H Headshell/Cartridge Kit - Blue

• A:Answer You can use the AT-VM95C Cartridge on the existing permanently attached proprietary ANGLED Dual headshell provided you have the Dual half-inch mount adapter. You CANNOT use the AT-VM95C/H Headshell/Cartridge Combo Kit on this turntable.

  Answered 1 year ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI have a Technics SL-Q202 with an old AT433E I need to replace. What is a good replacement cartridge?

Asked 1 year ago by Rory.

This question was asked about the related product: Audio-Technica AT-VM95C/H Headshell/Cartridge Kit - Blue

• A:Answer Unless you have the optional Auxiliary weight that screws into the end of the tonearm, you will need to use the supplied Technics headshell and mount the AT-VM95C Cartridge to it. The AT-VM95C/H Headshell/Cartridge Combo Kit is .5 grams too heavy for the provided main counterweight to counterbalance. Please note that the VM520EB Cartridge, not the AT-VM95C, is the current equivalent to the AT433E.

  Answered 1 year ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionJust purchased to replace the stock head shell and cartridge on my lp120 do they come pre aligned to my turntable specs??

Asked 1 year ago by Akscaram88.

• A:Answer Our Headshell/Cartridge Combo Kits come with the stylus overhang distance set at 15.5mm, the AT-LP120-USB Turntable calls for a stylus overhang distance of 16mm. We recommend stylus overhang be within 1mm of that specified by the turntable manufacturer, so the AT-VM95EN/H is good to go out of the package with this turntable.

  Answered 1 year ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionIs this compatible with a stanton STR8 150?

Asked 1 year ago by jong.

This question was asked about the related product: Audio-Technica AT-VM95C/H Headshell/Cartridge Kit - Blue

• A:Answer Yes, it is.

  Answered 1 year ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this fit a Sanyo TP 1005?

Asked 1 year ago by Topher.

This question was asked about the related product: Audio-Technica - Audio Technica AT-VM95E/H Headshell/Cartridge Kit - Green

• A:Answer It will fit, and the stylus overhang distance will be the correct, but we have not been able to determine what the maximum combined weight of the headshell + cartridge is that the counterweight can counterbalance. The AT-VM95E/H Headshell/Cartridge Combo Kit weighs 15.5 grams.

  Answered 1 year ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this work on a Vintage Hitachi HT 350 Turntable ?

Asked 1 year ago by TexasHowie.

This question was asked about the related product: Audio-Technica - Audio Technica AT-VM95E/H Headshell/Cartridge Kit - Green

• A:Answer Quite possibly, depending on what the maximum weight of the cartridge + headshell is which the provided counterweight can counterbalance. Hitachi documentation states that the cartridge weight range when using the supplied Hitachi headshell is 4 to 9 grams. They do not state what the weight of the headshell itself is unfortunately. The AT-VM95E/H Headshell/Cartridge Combo Kit weighs 15.5 grams total; the cartridge weighs 6.1 grams and the headshell with mounting screws weighs 9.4 grams. Most removable half-inch headshells weigh between 7 and 10 grams which would put the range of the total cartridge + headshell weight at 11 to 19 grams, so I think you will be ok.

  Answered 1 year ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this work on a Sony PS4300 turntable?

Asked 1 year ago by David.

This question was asked about the related product: Audio-Technica AT-VM95C/H Headshell/Cartridge Kit - Blue

• A:Answer Yes, it will as long as you use the standard counterweight that came with your turntable, do not use the extra weight that was provided.

  Answered 1 year ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this fit my Sony PS -X75 biotracer?

Asked 1 year ago by Les.

This question was asked about the related product: Audio-Technica - Audio Technica AT-VM95E/H Headshell/Cartridge Kit - Green

• A:Answer It will, but you will need to adjust the stylus overhang distance. The overhang comes set at 15.5mm on the Headshell/Cartridge Combo Kits. Your turntable has an overhang specification of 13mm. You will need to back the cartridge up 2.5mm on the headshell.

  Answered 1 year ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionDoes this turntable have USB out?

Asked 2 years ago by wyseguys.

This question was asked about the related product: Audio-Technica AT-VM95C/H Headshell/Cartridge Kit - Blue

• A:Answer No it's the 80

  Answered 1 year ago by Anonymous

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionWill this work with the older ATPL120 I bought around 2008’?

Asked 2 years ago by QuestionGuy.

This question was asked about the related product: Audio-Technica - Audio Technica AT-VM95E/H Headshell/Cartridge Kit - Green

• A:Answer Yes, it will. Please note that the headshell color is black, I believe the 2008 model AT-LP120 Turntable was available in silver only.

  Answered 2 years ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionIs this compatible with a Dual CS-515 turntable? I'd ideally like to replace the headshell and cartridge.

Asked 2 years ago by Brian.

This question was asked about the related product: Audio-Technica AT-VM95C/H Headshell/Cartridge Kit - Blue

• A:Answer No, it is not. You may use the AT-VM95C Cartridge, but not the straight headshell that it comes mounted to when you purchase the AT-VM95C/H Headshell/Cartridge Combo Kit. Because your turntable has a straight tonearm, it uses an angled headshell. This particular Dual headshell also uses a proprietary type fitting for attaching the headshell to the tonearm, you must use the Dual angled headshell.

  Answered 2 years ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this cartridge work with the Audio-Technica VM540ML model of turntable? We have purchased 6 needles in 2 years & keep giving out. We have decided to buy a new cartridge, would this work with our turntable. If not where can we get one reasonable?

Asked 2 years ago by AudioTechnicaVM540MLHead.

• A:Answer VM540ML is the model number of a cartridge, not a turntable. Please contact us at [email protected] with the model number of the turntable and please provide the effective tonearm mass if you know it. If you have purchased 6 needles in 2 years something is wrong. Failing needles can be the result of a cartridge compliance/effective tonearm mass mismatch, or the vertical tracking force (VTF) being set incorrectly.

  Answered 2 years ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question