A:Answer Dear Sami;
Place the Brother machine within range of your WPS or AOSS™ access point/router.
The range may differ depending on your environment. Refer to the instructions provided with your access point/router.
1. Press the Up or Down arrow key to choose Network.
Press OK.
2. Press the Up or Down arrow key to choose WLAN.
Press OK.
3. Press the Up or Down arrow key to choose WPS/AOSS.
Press OK.
4. When WLAN Enable? is displayed, press the Up arrow key to accept.
This will start the wireless setup wizard.
5. To cancel, press Cancel or Back.
6. When the LCD shows Press Key on rtr, hold down the WPS or AOSS™ button on your wireless access point/router for a few seconds.
7. Press the Up arrow key and your machine will now automatically detect which mode (WPS or AOSS™) your wireless access point/router uses and try to connect to your wireless network.
8. If your wireless device is connected successfully, the display shows Connected. The machine will print your machine's wireless status report. If the connection failed, check the error code on the printed report. If prompted, press OK.
Hope this helps.