Questions & Answers

Q: QuestionDoes this PC case have a headphone jack?

• A:Answer Yes, the case includes a headphone jack on the front panel.

Q: QuestionWhat is the purpose of the CORSAIR RapidRoute design in this case?

• A:Answer The RapidRoute design simplifies cable management by allowing you to route major cables through a single channel.

Q: QuestionWhat type of motherboard form factor does this case support?

• A:Answer The case is designed for ATX motherboards.

Q: QuestionHow many fans are included with the CORSAIR 4000D AIRFLOW case?

• A:Answer The case comes with two included 120mm AirGuide fans.

Q: QuestionWhat is the maximum length of a graphics card that can fit in this case?

• A:Answer The case supports a maximum GPU length of 360 millimeters.

Q: QuestionWhat is the maximum number of fans that this case can support?

• A:Answer The case can support up to six fans.

Q: QuestionDoes this case come with any pre-installed lighting?

• A:Answer No, the case does not come with any pre-installed lighting.

Q: Questionwhat kind of fans can i add to the case, which are the same specs as the stock ones?

Asked 3 years ago by MhZ.

• A:Answer One of the few consistent criticisms of the 4000D cases I’ve seen is that Corsair chose to use very inexpensive fans in an otherwise very good case, so pretty much any fans you buy will be as good or better. The ones in there now are basic sleeve bearing fans, which will likely get noisy or fail within a few years. Sleeve bearing fans are generally rated for around 30,000 hrs lifespan. FYI, if you keep the current fans, don’t mount them to the top of the case. Sleeve bearing fans tend to fail much more quickly when mounted horizontally. Any 120mmx25mm case fans will work. If you want to stick with Corsair, their ML120 Magnetic Levitation fans are their best but expensive, or if you like RGB lighting they have a lot of fans to choose from. You can buy multi-fan kits that will save you some money. I replaced my stock fans (and added 2 more) with Noctua NF-A12x25 fans, which have SSO2 fluid/magnetic bearings that are rated for 150,000 hrs lifespan and run much quieter than the stock ones. With fans, you can go with the cheaper ones and expect to replace them every few years, or put in good ones that will run quieter and probably last for the life of the PC. Hope this helps. You can find lots of articles online about fans and the various bearing types, blade designs, etc. that the various manufacturers use.

  Answered 3 years ago by MarkCVerified Purchase

  Helpful (11)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionDoes this case require the use of motherboard standoff screws for an ATX board or are they built in? Are standoff screws included and if so how many? My MB requires nine(9).

Asked 4 years ago by bob.

• A:Answer Hi bob, The case will have pre-installed motherboard standoffs for standard ATX motherboards, so you should be ready to go when you get it. -Brian

  Answered 4 years ago by Corsair

  
  Helpful (17)Unhelpful (1)ReportAnswer this questionShow more answers (3)

Q: QuestionWith a Ryzen 5 2600 how tall of a fan could fit in, I was thinking of using the ice giant thermosyphon but I don't know if it would fit

Asked 4 years ago by Dave.

• A:Answer Hi Dave, The case can support CPU coolers up to 170mm in height. -Brian

  Answered 4 years ago by Corsair

  
  Helpful (5)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionDoes the front panel have any type of filter behind it for dust-mitigation?

Asked 4 years ago by Anonymous.

• A:Answer Yes, it has a removable dust filter in front.

  Answered 4 years ago by DanielGCVerified Purchase

  Helpful (9)Unhelpful (0)ReportAnswer this questionShow more answers (5)

Q: QuestionIs a fan controller included in the cable side of the case?

Asked 4 years ago by Justin.

• A:Answer Hi Justin, No, the 4000D Airflow does not come with a fan controller. -Brian

  Answered 4 years ago by Corsair

  
  Helpful (7)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionThe promo shots for this case show two cables running to the SSD slots in the bare case; does it come with the cables for the SSD drives or do those have to be purchased separately?

Asked 4 years ago by Mario.

• A:Answer SSD Cables are not supplied with the case; these are typically provided with the motherboard (for data) and power supply (for power)

  Answered 4 years ago by MacroTechVerified Purchase

  Helpful (2)Unhelpful (0)ReportAnswer this questionShow more answers (4)

Q: QuestionI want to top mount my AIO, a corsair H115i PRO RGB. I have two sticks of corsair dominator ram. Will there be enough room in the case to mount my 280MM radiator and fans up top with the corsair dominator ram? My MB is a MSI MEG Z390 Ace. Thanks.

Asked 3 years ago by BiggityBates.

• A:Answer Hi BiggityBates, If you are mounting a 280mm radiator atop in our 4000 Series cases, we recommend using low-profile memory such as our LPX for height clearance. Otherwise, a 240mm radiator will fit fine with taller memory modules. If you have any additional questions, please feel free to reach out: support.corsair.com -Albert

  Answered 3 years ago by Corsair

  
  Helpful (4)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionWill the USB 3.1 Type-C port be compatible with a 3.2 Gen1 Type-C header from B550 AORUS ELITE V2 (rev. 1.0)? If that's the case what will be the max speed (Gbps)?

Asked 4 years ago by Marc.

• A:Answer Hi Marc, It would be compatible, the speed would be USB 3.1 speed. -Brian

  Answered 4 years ago by Corsair

  
  Helpful (2)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWould i be able to transfer my elietedesk 800 g1 motherboard in?

Asked 2 years ago by Em.

• A:Answer The board you are referencing is a micro atx board and will fit.

  Answered 2 years ago by TrevorVerified Purchase

  Helpful (2)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: Questiondoes anyone know if an RTX 4090 will fit in this case?

Asked 2 years ago by forest.

• A:Answer Hi, Yes, the RTX 4090 will fit in our 4000 Series cases as long as the GPU model's length is 360mm or shorter. For reference, the RTX 4090 FE is 304mm - proving to be a comfortable fit. If you have any additional questions, we'd be happy to assist: help.corsair.com -Albert

  Answered 2 years ago by Corsair

  
  Helpful (3)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionCan this fit a 3 fan aio at the top? Specifically this one “ iCUE H150i ELITE LCD Display Liquid CPU Cooler”.

Asked 3 years ago by Kravenhead.

• A:Answer Hi Kravenhead, You would want to install a triple fan AIO at the front of the case for proper fitment, there isn't enough space at the top of the case. If you'd like assistance with setting up your system, please feel free to reach out to our support team: support.corsair.com -Brian

  Answered 3 years ago by Corsair

  
  Helpful (2)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionCan we fit 2 3series GPU's in this case with a pcie riser or not. (3070 3060ti).

Asked 3 years ago by Jags.

• A:Answer You could easily fit 2 30 series GPU’s in there as long as your cable management stays neat behind the motherboard. 3090s will be a tight fit but as long as your cooling system is set up right you’ll have no issue.

  Answered 3 years ago by Joel

  Helpful (2)Unhelpful (0)ReportAnswer this questionShow more answers (3)

Q: QuestionI lost a few screws for my motherboard in this case does anybody know the measurements for the lost screws for replacement?

Asked 4 years ago by Kevin.

• A:Answer Hi Kevin, Are you referring to the standard 6-32 screws? If you're unsure, please feel free to reach out to our support team and we'd be happy help you: support.corsair.com -Brian

  Answered 4 years ago by Corsair

  
  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)