A:AnswerThank you for reaching out to us. This model features a multi-use detergent dispenser, accommodating various detergent types, including liquid and powder, as well as fabric softeners. Regarding power connectivity, the matching Electrolux 4.0 Cu. Ft. Compact Front Load Dryer (model ELFE4222AW) includes a power pass-through feature. This design allows you to plug the washer into the dryer, requiring only one 240V outlet for both appliances. This setup is particularly beneficial for compact spaces or areas with limited electrical outlets. Additionally, the ELFE4222AW dryer is ventless, utilizing condensation drying technology. This means it doesn't require external venting, offering flexible installation options, especially in apartments or homes where venting is impractical. - Maria
A:AnswerThank you for this inquiry, Kim. Yes, with about 3-5 inches of minimum clearance requirement, we can allow between the unit and the back of the wall. ~Juan
A:AnswerHello, Mike! Thanks for reaching out and for your inquiry. We do not recommend installing such appliances (washer and dryer) in a camper due to safety reasons and to consider minimal vibration or movement of the appliance. Please know that the installation must be performed by a qualified service person. We hope this information helps! ~Juan
A:AnswerHello Goose,
Thank you for reaching out to us! Please know that Front-load washers, including the Electrolux 2.4 Cu. Ft. Stackable Front Load Washer, are energy-efficient and water-saving, but they can indeed be susceptible to mold and mildew buildup. Here are some steps you can take to prevent and address this issue:
Promptly Remove Laundry: Always remove your laundry promptly after the wash cycle completes. Leaving wet clothes in the washer can contribute to mold growth.
Use HE (High-Efficiency) Detergent: Opt for high-efficiency laundry detergent and use the recommended amount. Excessive detergent residue can lead to mold buildup.
Avoid Liquid Fabric Softeners: Liquid fabric softeners can leave a sticky residue that promotes mold growth. Consider using dryer sheets instead.
Regularly Clean the Glass and Gasket: The door gasket (seal) and glass area are common spots for mold and mildew. Regularly wipe them down with a disinfectant to prevent buildup.
Clean the Detergent Dispenser and Attachments Bi-Weekly: Mold and mildew tend to accumulate in the detergent dispenser. Remove the dispenser and clean it thoroughly. Also, pay attention to the slot where the dispenser sits, as it can harbor hidden mold.
Keep the Washer Door Open: When the washer is not in use, leave the door ajar. Allowing air circulation helps prevent moisture buildup and discourages mold growth.
Run a Dehumidifier in the Laundry Room: If possible, use a dehumidifier in the laundry area to maintain optimal humidity levels and reduce the chances of mold development.
Remember that prevention is key. By following these practices, you can keep your Electrolux front-load washer clean and mold-free. If you notice any signs of mold, address them promptly to maintain a hygienic washing environment!
- Owen
A:AnswerHello, BobGH71! Thank you for your inquiry. The dryer combination with model ELFE4222AW has a reversible door, but this washer does not have that option. We hope this is helpful to you. ~Sam
A:AnswerHi there, Nadia! Thank you for your inquiry. We can only assist with Electrolux appliances because we cannot determine whether your current model brand can be stacked with our washer and if your dryer will be compatible with the recommended stacking kit for our appliance. Best to consult an installer to see if that will work.
We hope this is helpful to you. ~Sam
A:AnswerHello, Earl! Thank you for your question! This washer has a Heating element. The drying process air is heated by an internal heating element, which then passes over and through your clothes.
Should you have any additional questions or concerns, please don't hesitate to connect with us via Live Chat or call us at 1-800-374-4432 Monday-Friday, 8:30 a.m.–8 p.m. EST, and we’ll be happy to assist. ~ Sam
A:AnswerHI there, valued customer! Upon further review the height of both the washer and dryer 33 1/2 inches. if added together the height range will be around 72-75 inches with the stacking kit.
-Jess
A:AnswerHi, Boby! Most retailers have a display on the floor of the product. You can also visit our branded website for features, specifications, installation, and other information. ~ Christy
A:AnswerThanks for reaching out, COGirl. Use a low-sudsing, high efficiency detergent to prevent oversudsing in front load washers. Use of multi-product (detergent plus softener) sheets or color-absorbing sheets NOT recommended. They could disable your machine and result in unwarranted repair costs. You can use fresh rinse option when additional rinsing is desired to remove excess dirt and detergent. It is recommended for heavily soiled loads or if household members have sensitive skin. We hope this information help you and your shopping experience.-Angel
