Just keeps on beeping null

The batteries might be that drained they register as not good. I charged mine in a different charger for 5 minutes then put them into the Energizer charger and they then showed as charging.

The charger work only with 2 (or 4) batteries at a time. Otherwise will not chrge the batteries and will beeping to let you know that it is not charging.

For initial charging, just put 2 batteries in one side. Once charged slightly all 4 slots can be used. (Chpro-uk) Seems like a design fault. I had to do this for the 4 new batteries that came with the charger and a brand new pack. I also wouldn't recommend putting batteries on a radiator.

As per a previous answer, the batteries had drained so low that the pro charger registered the batteries as bad. A few minutes in a different charger then putting them back into the pro fixed the problem.

I'm not for sure but my batteries did that I looked at it and it looks like the batteries

Mine was doing this on both sides. I just let it beep for about 10 mins then turned it on and off, one side stopped but the other side carried on. So I swapped sides of the batteries and let the side that was still beeping carry on for another 10 mins. Turned it on and off again and that sorted it. Pretty long winded but it worked! I was ready to chuck my batteries out.

If the cells are not metal oxide cells it will keep beeping

Try removing one battery if the beeping stops let it be and check back later to see if the batteries are charged . Then put charge the last battery alone . If taking one out doesn’t work try to take out two. Also if nothing works contacts energizer directly or Best Buy .

Means the battery you are trying to charge is bad.

https://m.youtube.com/watch?v=Pkyr_htGH0Q It doesn't get any more official than this. Battery is dead.

This is because you have to have all of one size of battery at a time.

“Just keeps on beeping”

Asked by Mat 9 years ago

Answer This Question

See all questions & answers

Energizer - Rechargeable AA and AAA Battery Charger (Recharge Pro) with 4 AA NiMH Rechargeable Batteries-Front_Standard

1-10 of 13 Answers

The batteries might be that drained they register as not good. I charged mine in a different charger for 5 minutes then put them into the Energizer charger and they then showed as charging.
Answered by iffish20 5 years ago
Sorry, there was a problem. Please try again later.
The charger work only with 2 (or 4) batteries at a time. Otherwise will not chrge the batteries and will beeping to let you know that it is not charging.
Answered by Ernesto 6 years ago
Sorry, there was a problem. Please try again later.
For initial charging, just put 2 batteries in one side. Once charged slightly all 4 slots can be used. (Chpro-uk) Seems like a design fault. I had to do this for the 4 new batteries that came with the charger and a brand new pack. I also wouldn't recommend putting batteries on a radiator.
Answered by NewB 4 years ago
Sorry, there was a problem. Please try again later.
As per a previous answer, the batteries had drained so low that the pro charger registered the batteries as bad. A few minutes in a different charger then putting them back into the pro fixed the problem.
Answered by Springy 5 years ago
Sorry, there was a problem. Please try again later.
I'm not for sure but my batteries did that I looked at it and it looks like the batteries
Answered by superspeedr1234 6 years ago
Sorry, there was a problem. Please try again later.
Mine was doing this on both sides. I just let it beep for about 10 mins then turned it on and off, one side stopped but the other side carried on. So I swapped sides of the batteries and let the side that was still beeping carry on for another 10 mins. Turned it on and off again and that sorted it. Pretty long winded but it worked! I was ready to chuck my batteries out.
Answered by Anonymous 2 years ago
Sorry, there was a problem. Please try again later.
If the cells are not metal oxide cells it will keep beeping
Answered by joe15 8 years ago
Sorry, there was a problem. Please try again later.
Try removing one battery if the beeping stops let it be and check back later to see if the batteries are charged . Then put charge the last battery alone . If taking one out doesn’t work try to take out two. Also if nothing works contacts energizer directly or Best Buy .
Answered by JamesWavy 2 years ago
Sorry, there was a problem. Please try again later.
Means the battery you are trying to charge is bad.
Answered by Stevesitz 6 years ago
Sorry, there was a problem. Please try again later.
https://m.youtube.com/watch?v=Pkyr_htGH0Q It doesn't get any more official than this. Battery is dead.
Answered by Y2Ktech 5 years ago
Sorry, there was a problem. Please try again later.

1-10 of 13 Answers