A:AnswerI would recommend that you buy an audio extractor which Best Buy sells and works great for me. I have the hdmi from my cable connect directly into the Audio Extractor and then I send 1 HDMI to the projector for the image to projected and an optical cable to my BOSE audio system (my system is old so it did not have an HDMI to bring in the sound).
It has been working great for me.
I have no idea if there is Bluetooth option for this projector.
A:AnswerHi peterg, the Epson Home Cinema 1060 projector can be connected to a video source using a Component (Y/PB/PR)-to-VGA cable. Regards, Bobby - The Epson Team.
A:AnswerHi Jay. If the image is still blurry on the corners after adjusting the Sharpness, try adjusting the Tracking and Sync settings on the Home Cinema 1060 projector. Regards, Bobby - The Epson Team.
A:AnswerHi Melody, This is Mark from Epson. The Home Cinema 1060 has an internal speaker for sound. If you want to run additional speakers you should connect them to your audio/video source, such as a streaming device or A/V receiver. Regards, Mark - The Epson Team.
A:AnswerHi Sarah, The Home Cinema 1060 has a built-in 2 Watt speaker. The projector does not have an audio output jack, so if you need more volume, you will have to send the audio signal directly from the source to a separate amplifier. Regards, Mark - The Epson Team.
A:AnswerThe projector can be used outside, but I would not recommend it during the day. Crystal clear image once the sun goes down, but if you want to project outside during the day, you will need a MUCH higher quality projector.
A:AnswerHi lito, You can run an HDMI cable to the Home Cinema 1060 for video and send the audio through a separate cable to a surround sound output device. You cannot pass sound through the HC 1060 because it does not have an audio output jack. Regards, Mark - The Epson Team.
A:AnswerHi Taft, This is Eduard from Epson. Yes. You can connect the Epson Home Cinema 1060 1080p 3LCD projector to a live streaming device. Check the user's guide on how to set it up. Hope this helps! Regards, Eduard - The Epson Team.
A:AnswerHi, you may need to re-adjust the image resolution on your Home Cinema 1060 projector. If you need further assistance, please visit the official Epson Support site to contact our support team. Regards, Bobby - The Epson Team.
A:AnswerHi Rich, You can connect the Epson Home Cinema 1060 to devices that support an MHL connection. Check your device's documentation for more information. The projector is not bluetooth compatible. Regards - Alexander - The Epson Team.