“Hello, We need to replace our white Kenmore Model 721.89941490 - serial #611KM05137 over the range microwave. Which GE MW will work? There are cabinets on either side of the stove/microwave.”
Answer This Question
1-3 of 3 Answers
Watch out. NOT all over-the-range microwaves are the same HEIGHT. The old Kenmore you have is 15 1/2 inches high. I know because I have the same one from 1995 and it just died. All the new ones for over the range are either a lot shorter in height or about 16 1/2 inches high. I Don't know what the code is for clearance between your range top and the bottom of the microwave, but this extra inch might put you out of spec. Also, if you have tiles on the wall behind the range, like I do, and they were cut away to allow for the 15 1/2 inch high microwave to fit flush to the wall under the cabinet, then the taller ones will not fit. You will need to either 1) raise the cabinet, 2) cut more tile away, which is hard to do without breaking tiles 3) cut away the underside of the cabinet which may not be possible if it is a solid board 4) mount the microwave a tile-thickness away from the wall, This would be my preference. You would need to put a spacer the thickness of the tiles behind the new mounting rail. You may still be out of spec with the range-to-microwave clearance.
Sorry, there was a problem. Please try again later.Hi DebC - Thanks for your interest in GE! All 30" over-the-range microwaves are approximately the same width, and are designed to fit into a 30" wide cabinet opening. Check out GE® 1.9 Cu. Ft. Over-the-Range Sensor Microwave Oven JVM7195DKW with sensor cooking controls (Automatically adjusts time and power for delicious cooking results) and a dark gray, easy clean enamel interior with steam clean option. Messes inside the microwave are easy to wipe away after steam loosens food grime. Play Video: https://www.youtube.com/watch?v=wSIh-YJSlt0&list=PLX8_V2wHGuhntzHGB3F5dEMg4YMkWMcxt&index=2&t=0s - We suggest to view the Quick Specs at the following link for product and cabinet dimensions: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=JVM7195DK_C3.pdf - Approx. Product Dimensions (WxHxD) (in.) 29 3/4 in x 16 1/2 in x 15 1/2 in. We hope it fits! Keep in touch at GEAppliances.com - Sue
Sorry, there was a problem. Please try again later.It should almost all over the range micros are the same size.
Sorry, there was a problem. Please try again later.