Questions & Answers

Q: QuestionI bought GE Model # JS760SP5SS and reccomended trim kit JXFILLR1DD. The left pieces have an indentation in them about 3/32" deep and 10" long. This coincides with nothing on the range, just leaving a gap. I see it on your picture as well. What gives?

Asked 2 years ago by Perplexed.

Q: QuestionHi Will this trim kit fit the Monogram ZGP304NTSS range?

Asked 2 years ago by Jollyrancher.

• A:Answer I do not know for sure. It looks pretty universal. I had not trouble on a GE.

  Answered 2 years ago by Anonymous

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill these trim pieces fit on an old JED8430ADB Jenn Aire 30" drop in ceramic cooktop? I have a small chip on the front edge and one side

Asked 2 years ago by homeowner.

Q: QuestionWill this fit GE Profile range #P2S930SEL4SS

Asked 2 years ago by Liz.

• A:Answer Good day, We'll be happy to answer your question! This trim kit will indeed fit model P2S930SEL4SS. If you have any other questions, we're always happy to help. Stay in touch! Mike@GEA

  Answered 2 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionMy countertop height is 35 3/4 inches in height and I have a 39 inch width between cabinets. I am looking at the GEJS645SLSS slide in electric range. There is nothing behind my current range. Will this GE work for me?

Asked 2 years ago by Dan.

Q: QuestionWill this filler work with Model CES700M2N3S5? Thank you

Asked 2 years ago by Kathy.

• A:Answer Hey there. We’re happy to let you know this kit is compatible with your CES700M2N3S5 range. If you have any additional questions, we’re always happy to help. Have a great day! -Gina@GEA

  Answered 2 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWill this trim kit fit the GE CAFE electric slide in range model # CES700P2MS1 ?

Asked 2 years ago by Donna.

This question was asked about the related product: GE - 30" Slide-in Range Filler Kit - Black Slate

• A:Answer Should fit any make and model since it only glued to the countertop.

  Answered 2 years ago by stan

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionDoes the p2s930ypfs have a recess in the back for the gas line extending a few inches out of the wall in the center near the top behind the range? I have not ordered the range yet and need to know. Or do I have to have a plumber recess the line?

Asked 2 years ago by Frustrated.

• A:Answer Thanks for checking with us! We found that this range does have a recess in the back for a gas line, however it is located near the lower rear of the appliance and not the top. You can see a diagram of this model here: https://files.bbystatic.com/lWq5q6zPWFu2MiLm7h2%2F8g%3D%3D/Installation%2BGuide Thank you for your question. We hope you find this to be helpful! -Sylvia@GEA

  Answered 2 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionMy range was installed too high and the range top is 1/2 taller than the counter. Will this work even though it is only 1/4 inch high.

Asked 2 years ago by Anne.

• A:Answer It will help reduce the appearance of it being to high since this glues to the countertop with its adhesive

  Answered 2 years ago by stan

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionIs this model compatible with GEPGS930YP3FS range.

Asked 2 years ago by Sue.

• A:Answer Hey there! We’re excited to let you know this filler kit is compatible with range model PGS930YPFS. Please let us know if you need additional assistance and we’ll be happy to help. -Gina@GEA

  Answered 2 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this fit a ge model jgss66sel3ss

Asked 3 years ago by James.

• A:Answer Hello- Thanks so much for your question. The JXFILLR1DD is the one recommended for your model but the black one will work if you prefer that color. If you have any questions in the future, please let us know. We are always happy to help! Joyce@GEA

  Answered 3 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionDoes this work for the ge range jgs760eps slide in?????

Asked 3 years ago by Audi.

This question was asked about the related product: GE - 30" Slide-in Range Filler Kit - Black Slate

• A:Answer Hello. Thanks for reaching out! Yes, model JGS760EPES is compatible with model JXFILLR1DD. If you have any additional questions, please reach out. We are happy to help! - Kianna@GEA

  Answered 3 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill the gap filler work with model P2S930SELSS?

Asked 3 years ago by Lynn.

• A:Answer We measured length and width of gap and purchased rods that were close to size. Had to cut 2 of them, but looks great!

  Answered 3 years ago by Trim

  • 
  • 
  • 
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionHi, I have a GE slide in gas range oven model #JGS760EPES. Will this filler kit close the gap in the rear top between the range top and the wall? How does it attach to the gas range in the back? Thank you.

Asked 3 years ago by jakarta98.

• A:Answer Hi, Great question and we're happy to help! Yes, this is the filler kit that can close the gap between the cooktop and wall. However for your JGS760EPES model, we do recommend using the JXFILLR1DD which is the filler kit for slate ranges; the JXFILLR1BB is for black models. This optional 5-piece filler kit includes one long trim piece that can be used along the rear of the range and four side trim pieces (two optional pieces for each side depending on length needed). It mounts with special 3M Adhesive strips that are durable and heat/grease resistant. Hope this helps and thanks for choosing GE Appliances! - Sharon@GEA

  Answered 3 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionDoes the GE 30" slide in filler kit- stainless steel work with my new PGS930YPFS oven? Thank you

Asked 3 years ago by Premomom.

• A:Answer Hello, congrats on your new oven, and great question! Model JXFILLR1SS filler kit works with oven PGS930YPFS.Should you need any further assistance, we are here to help. Happy cooking!- Kianna@GEA

  Answered 3 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionDoes GE make a trim kit for their CES 700P slide in electric range

Asked 3 years ago by kit.

• A:Answer Hello, thanks for reaching out with your trim kit question. We do have a trim kit Model JXFILLR1SS that is stainless steel and compatible with model CES700P. We hope this is the answer you were looking for and we are always here to help if you should have any additional questions.- Kianna@GEA

  Answered 3 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionDoes GE make a stainless steel trim kit for their Cafe 30 inch slide in glass top range model CES700P?

Asked 3 years ago by Kate.

• A:Answer Hello, that's a great question, and excellent choice for range! Model JXFILLR1SS is stainless steel and compatible with model CES700P. We hope this is the answer you were looking for and we are always here to help if you should have any additional questions.- Kianna@GEA

  Answered 3 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI have GE slide in range JGS760SELSS. is this the right range filler/trim kit for that model? Thanks!

Asked 3 years ago by Jen.

• A:Answer Hello- Thank you for reaching out with your question. We appreciate you clarifying. Yes, this is the correct filler kit for your model. The JXFILLR1SS is correct. If you have any questions in the future, please let us know. We are always happy to help! Joyce@GEA

  Answered 3 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI purchased GE stove range JGSS66EELES. Does this work with it? How about the gap on the back? Is there any for the gap on the back?

Asked 3 years ago by Hobicat.

• A:Answer Hi there, Congratulations on your brand new range! We can't wait for you to cook all kinds of incredible meals with it. We would recommend the trim kit JXFILLR1DD to better match the Slate color of your range. There is a trim for both sides and the rear. Happy cooking! Mike@GEA

  Answered 3 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI just bought 30" Monogram from Best Buy. Can you please tell me if there is any filler which works for my range?

Asked 3 years ago by jpj.

• A:Answer Hello and thank you for checking. At this time we do not offer a range filler kit for Monogram professional ranges. Hope this helps. Geoff@GEA

  Answered 3 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question