“How do you set this machine to "SPIN" only cycle? I washed bedding but the sheets were still too wet when the machine finished. It has a "RINSE & SPIN" but his is not what I am looking for.”
Answer This Question
1-5 of 5 Answers
Turn the knob to the rinse and spin cycle. The extra rinse button should light up. Press that button before pressing start and it should turn off the rinse portion of the cycle.
Sorry, there was a problem. Please try again later.Turn the knob to the rinse and spin cycle. The “extra rinse” button should light up. Press it to turn it off before pressing start and it should only do the spin portion of the cycle.
Sorry, there was a problem. Please try again later.Open lid and close it. Turn dial to rinse and spin. Make sure yellow light above says rinse and spin. You can also add 2nd rinse at this point. Press Start button on upper right === not of upper left. It will start to do what you thin is all wrong, in that it you will hear the sound of water starting to fill. But do not pull the garments out. After 5 seconds the water will stop. The machine will then go quiet, while it figures out what to do. It will then not add any more water but will start to drain, and ten minutes later it will start to spin. Don't yank out the clothes when you hear the water as I did 5 times before
Sorry, there was a problem. Please try again later.I haven't seen a spin only option. My old washer didn't have one either. Isn't that something on a top loader?
Sorry, there was a problem. Please try again later.Hi STARBUCKS2010 - Thanks for reaching out to us and for choosing this UltraFresh front load washer for your home! We are sorry to hear of the difficulty you have had with your bedding coming out too wet and are happy to offer you some guidance in this. If items are too wet, especially when washing a small load containing both heavy and light items, this is may be because the load is out of balance causing the machine to slow the spin speed down. In this case, you will need to redistribute the items and run a Rinse & Spin cycle. - This washer does not have a Spin only cycle and we apologize for any inconvenience this may cause. However, selecting a higher Spin speed will remove more water from the items! To change the Spin speed, press the Spin speed pad until you have reached the desired setting. We hope that this helps to clarify! -Eliza@GEA
Sorry, there was a problem. Please try again later.