A:AnswerNo, it does not come with casters. Don't think you would want them on it as machine would move around during cycle. I put some round plastic mover things under mine so it slides right across the linoleum on my kitchen floor, they work great.
A:AnswerHello lily - this is Nancy at Haier America and we are happy to help you. This washer uses a pump, however, the height of the standpipe must be between 31-1/2” (80 cm) and 47-1/4”(120 cm) from the bottom of the washer. The minimum diameter of the standpipe must be 2" (5 cm). We hope this helps! Thanks for checking with us!
A:AnswerHello Crystal - this is Nancy at Haier America and we are happy to help you. This washer uses approximately 325 watts. The electrical requirements are: 120 Volt / 60 Hertz. Normally, compact washers have a power cord that is approximately 4' in length. Normally, the inlet and outlet hoses are approximately 54" long. For additional specifications, please visit: file:///C:/Users/214010392/Downloads/Dispatcher%20(30).pdf We hope this helps! Thanks for checking with us!
A:AnswerAll parts come with machine. The only part I had to buy was an adapter for kitchen sink in order to connect this. Drainage hose isn't very long and I bought a longer one.
A:AnswerHello Leslie - This model has the following wash cycle options: Heavy Duty, Delicate, Rinse & Spin, Normal, Quick, and Spin Only. The water level can be set to Small, Medium, Large, Super. - TREY@HAIER
A:AnswerHello Lisa. If you are interested in using a stack rack, the HLP141E dryer can be placed on the stack rack with the washer underneath. We do not currently have a Haier freestanding dryer that would be installed next the washer. Thank you for checking with us. Olga@Haier
A:AnswerYou can install this yourself! It is meant to be connected to a sink, not a traditional laundry hookup, since there is only one water inlet. If you have a hookup, you might want to find a machine that has inputs for both hot and cold.