1-2 of 2 Answers
Setting the Clock This unit has a Daylight Saving Time (DST) Switch located on the back of the cabinet. By default, it is set to auto and will automatically adjust the time at the start and end of daylight saving time. If your location does not observe daylight saving time or you wish to manually adjust, move the switch to +1 to add an hour or to –1 to subtract an hour. 1. Press and hold the Time Set Button located on back of the unit for 2 seconds until the clock display flashes and a beep sounds. 2. Press the or Buttons to adjust the clock to the current time (hold for rapid setting). Make sure you set the correct AM/PM time. The PM indicator appears to the left of the display; there is no AM indicator. 3. Press the Time Set Button to confirm the time. The year will flash on the display. 4. Press the or Buttons to adjust the clock to the current year (hold for rapid setting). 5. Press the Time Set Button to confirm the year. The month will flash on the display. 6. Press the or Buttons to adjust the clock to the current month (hold for rapid setting). 7. Press the Time Set Button to confirm the month. The date will flash on the display. 8. Press the or Buttons to adjust the clock to the current date (hold for rapid setting). 9. Press the Time Set Button to confirm the date and exit clock setting mode. 2 beeps will confirm clock setting is complete. TIP: To toggle the clock display between standard 12 hour time and 24 hour (“military”) time display, press the Alarm Button or Alarm Button while the display is flashing during clock setting. This information is on page 7 in the user manual https://cdn.ihomeaudio.com/media/product/files/iBT232_User_Manual_A.pdf
Sorry, there was a problem. Please try again later.Go to the following link for the instruction manual: https://cdn.ihomeaudio.com/media/product/files/iBT232_User_Manual_A.pdf
Sorry, there was a problem. Please try again later.