1-2 of 2 Answers
You have to connect to your provider with a HDMI cord and connect your cable cord to the tv input.
Sorry, there was a problem. Please try again later.Hi Gunner, HDMI (best) On the HOME screen, navigate to the INPUTS row, then select HDMI1, HDMI2, or HDMI3. Note: An HDMI cable carries both audio and video. You do not need to use any audio cables. AV (good) Note: Cables are often color-coded to match color-coded jacks. On the HOME screen, navigate to the INPUTS row, then select Composite. IMPORTANT: When you connect the audio using the AV jacks, the audio output is analog. Coaxial (good) On the HOME screen, navigate to the INPUTS row, then select Antenna. If you cannot tune to channels you know exist, scan for channels. Go to Settings > Live TV > Channel Scan. Notes: - Use a coaxial cable to eliminate interference and noise from radio waves. - If the antenna is not installed correctly, contact qualified service personnel to correct the problem. - If the signal level for a channel is weak, the picture may be distorted. Adjust the antenna or use a highly directional outdoor or set-topantenna with a built-in amplifier. - If the picture quality is good on some channels and poor on others, the problem may be caused by a poor or weak signal from the broadcaster or cable TV provider. - If you connect to cable TV without a set-top box and experience poor picture quality, you may need to install a set-top box to improve signal reception and picture quality. Contact your cable TV provider about upgrading to a set-top box. - Many high-definition (HD) channels upscale standard-definition (SD) content. The picture displayed on your TV is still displayed as SD, - thus the picture quality will not be as clear or crisp as it would be if the content was originally recorded in HD. Insignia Products Marites www.bestbuy.com/site/brands/best-buy-brands/pcmcat1596746025285.c?id=pcmcat1596746025285
Sorry, there was a problem. Please try again later.