“inside dimensions What are the inside dimensions? How big is the housing for the compressor inside the freezer? I'm building a kegerator and I want to make sure it will hold 2 kegs. Thanks!”
Answer This Question
1-5 of 5 Answers
In the deep section it will hold something 27 inches high, 24 inches wide and 15 inches front to back. It will hold something 19 inches high and 8 1/2 inches wide over the compressor.
Sorry, there was a problem. Please try again later.Inside dimensions: 32 inches wide, 14.5 inches deep (front to back) and 27 inches from floor to lid. Plus in the lower right floor is a step that is 8 inch wide, 8.5 inch floor to top of step Hope that helps!
Sorry, there was a problem. Please try again later.Height=27" Width=32" Depth=14.5" You lose the depth of the freezer plus 8.5" of height and 8.5" of width to the cooling mechanism.
Sorry, there was a problem. Please try again later.actually they are called Keezers. Kegorators are made from frig units and such. A keezer run in line with a temp control unit, you can run the unit at 34-36 degrees for lagering, or cold crashing, and even a serving one also. The reason I know this I am in the middle of doing the same project myself and I have done a ton of research.I also home brew beer wine. I hope this helps
Sorry, there was a problem. Please try again later.If you are looking at the front of the freezer, the internal dimensions are 32.28 inches wide, 27.56 inches high, and 19.49 inches deep. The compressor is built into the bottom corner and can be at 8.26 inches wide, 8.27 inches high, and 19.49 inches deep (same depth).
Sorry, there was a problem. Please try again later.