Questions & Answers

Q: QuestionDoes battery pro controllers work on this because I do not want to buy batteries just for my controller?

Asked 5 years ago by Tristan.

• A:Answer Official Nintendo Pro Controllers do not have separate batteries, the rechargeable battery is encased in the controller, they come with a cord to connect to the switch to charge. This insignia charger has two usb-c connections that the pro controller's sit on to charge. (Note Controllers with silicone skins do not fit on the charger without pulling skin away from controller, which I suspect will stretch out the skin in time, but am not sure.)

  Answered 5 years ago by Motheroftwo

  Helpful (3)Unhelpful (0)ReportAnswer this question

Q: QuestionWill they fit on charger with silicone skins, or do they need to come off?

Asked 5 years ago by ChesterCheetah.

• A:Answer No they do not fit with the skin on...at least mine doesn't. I have two controllers with silicone skins (Red and Blue, like the joycon's). The skin has to be pulled away from the controller to seat into the charger.

  Answered 5 years ago by Momoftwo

  Helpful (2)Unhelpful (0)ReportAnswer this question

Q: QuestionDoes this charger work for a wireless gamecube nintendo switch controller?

Asked 4 years ago by Potato.

• A:Answer This charging station is for Nintendo Switch Pro Controllers.

  Answered 4 years ago by InsigniaCustomerSupport

  
  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionCan this charge only 1 pro controller or do you need to have two docked for it to charge?

Asked 4 years ago by Anonymous.

• A:Answer You can absolutely just charge one if you want. That’s what I do right now until my second one comes in. It just has the ability to charge two at once (it has two slots).

  Answered 4 years ago by StephanieVerified Purchase

  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionHow long does it take to fully charge a controller?

Asked 4 years ago by Porkchop.

• A:Answer It will take around 4.5 hours.

  Answered 4 years ago by InsigniaCustomerSupport

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionCan you charge a powera enchanted controler with the charging dock?

Asked 4 years ago by Me.

• A:Answer Not to my knowledge. It only charges a certain controller made for the switch

  Answered 4 years ago by AbleapplianceVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWould these fit the 8bitdo SN30 Pro+ Controllers as well?

Asked 5 years ago by JGO13.

Q: QuestionWill the Charging Station Dock also charge the Nintendo Joy-con Charging Grip (and the Joy-cons when attached)? It looks like they would fit, but want to be sure.

Asked 5 years ago by Nate.

• A:Answer Yes It does fit. I have been using it that way. I initially bought it for my Zelda controller but this only fits Nintendo Switch Pro controller and the charging grip and even a type c phone since it’s skinny enough.

  Answered 4 years ago by DarkDreamrVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionCan this be used to charge Nintendo Wii U Pro controllers as well?

Asked 5 years ago by Sara.

• A:Answer nope. those are a totally different fitting. You can probably get one used for $5 at a gamestop, though. I just use a cord I had for a very old phone and it charges fine.

  Answered 5 years ago by Hutto

  Helpful (1)Unhelpful (1)ReportAnswer this questionShow more answers (1)

Q: QuestionIs it safe to leave the pro controllers plugged into this charging dock all the time when they are not in use or could this cause safety problems, damage to the batteries of the controllers, etc?

Asked 5 years ago by R1254.

• A:Answer Hi, RSS. Leaving the controllers connected after fully charged could cause eventual malfunction due to overcharging. Cesar G. - Insignia Support

  Answered 5 years ago by InsigniaCustomerSupport

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this also charge the PowerA - Enhanced Wireless Controller?

Asked 4 years ago by SNick.

• A:Answer Possibly. It would need to be a usb c, but it would also need to fit the curvature of the area around the plug on the dock. I have a 8 bit do controller that does not charge, the contour of the controller doesn’t allow it to actually plug in. Legit Pro controllers work perfectly.

  Answered 4 years ago by dani31Verified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)