How to install the micro chip into the reader? null

If you're referring to a micro SD card, simply insert the micro SD card into the slot labeled "microSD". Be sure the gold contacts on the microSD card are facing up.

The SD card goes into the larger slot label side up before you load the stick into your USB port. There should be a blue LED light and then access it from your "My Computer" in the removable disk/hardware area. There are directions inside the box with the stick. The blue light can be hard to see, but DO NOT remove the stick while it is still blue or you could wipe out your SD card. Make sure you go into "My computer" and select 'eject disk'.

It only fits in one way, the right way. Open the cap and slip the chip into the small slot, metal side down.

Cards plug into reader and the reader plugs into usb slot. Simple.

The reader has two slots, one for the SD and one for the micro SD. You can't insert them wrong or backwards.

Pull the SD card out of the device and have it facing up when you slide it into the slot on the side of the reader. Plug the reader into your computer and you will see the card as a new drive.

With this product you can plug the chip into this device and then plug the device into any USB port.

Remove the microchip from the camera and insert it into the slot on the device. It only fits one way into the device. Hope this helps

If you mean the Memory card that you need to read on a computer with USB but without a card reader, simply insert your memory card into a corresponding slot and insert the reader into a USB port

There is a slot in the side for the microSD card.

“How to install the micro chip into the reader?”

Asked by Kathy 10 years ago

Answer This Question

See all questions & answers

Insignia™ - USB 2.0 SD/MMC Memory Card Reader - Black-Front_Standard

1-10 of 11 Answers

If you're referring to a micro SD card, simply insert the micro SD card into the slot labeled "microSD". Be sure the gold contacts on the microSD card are facing up.
Answered by gb210 10 years ago
Sorry, there was a problem. Please try again later.
The SD card goes into the larger slot label side up before you load the stick into your USB port. There should be a blue LED light and then access it from your "My Computer" in the removable disk/hardware area. There are directions inside the box with the stick. The blue light can be hard to see, but DO NOT remove the stick while it is still blue or you could wipe out your SD card. Make sure you go into "My computer" and select 'eject disk'.
Answered by Impala1967 10 years ago
Sorry, there was a problem. Please try again later.
It only fits in one way, the right way. Open the cap and slip the chip into the small slot, metal side down.
Answered by Mickey1Mouse 10 years ago
Sorry, there was a problem. Please try again later.
Cards plug into reader and the reader plugs into usb slot. Simple.
Answered by Nickname31 10 years ago
Sorry, there was a problem. Please try again later.
The reader has two slots, one for the SD and one for the micro SD. You can't insert them wrong or backwards.
Answered by KSAMSONJ 10 years ago
Sorry, there was a problem. Please try again later.
Its plug and play
Answered by X1028 10 years ago
Sorry, there was a problem. Please try again later.
Pull the SD card out of the device and have it facing up when you slide it into the slot on the side of the reader. Plug the reader into your computer and you will see the card as a new drive.
Answered by cainne 10 years ago
Sorry, there was a problem. Please try again later.
With this product you can plug the chip into this device and then plug the device into any USB port.
Answered by Herb 10 years ago
Sorry, there was a problem. Please try again later.
Remove the microchip from the camera and insert it into the slot on the device. It only fits one way into the device. Hope this helps
Answered by TechNovice 10 years ago
Sorry, there was a problem. Please try again later.
If you mean the Memory card that you need to read on a computer with USB but without a card reader, simply insert your memory card into a corresponding slot and insert the reader into a USB port
Answered by ValBB 10 years ago
Sorry, there was a problem. Please try again later.

1-10 of 11 Answers