“Does this oven and microwave combo gat to have 2 separates circuits or just one”
Answer This Question
1-2 of 2 Answers
Just one 50 amp circuit.
Sorry, there was a problem. Please try again later.Hi Randy. The LG 30" Combination Double Electric Convection Wall Oven with Built-In Microwave - Stainless Steel, Model # LWC3063ST n must be electrically grounded in accordance with local codes or, in their absence, with the National Electrical Code ANSI/NFPA No.70- latest edition in United States, and all local codes and ordinances. Wall Ovens s must be hard wired (direct wired) into an approved junction box. A plug and receptacle is not permitted on these products. It can be connected to a 3-wire circuit or a 4-wire circuit. For a 3-wire circuit, • Connect the oven ground (green) wire and neutral (white) wire to the branch circuit neutral (white or gray) wire, using a wire nut. • Connect the oven red wire to the branch circuit red (L2) wire in accordance with local codes, using a wire nut. • Connect the oven black wire to the branch circuit black (L1) wire in accordance with local codes, using a wire nut. If the residence red, black or white wires are aluminum conductors, see WARNING ( New branch-circuit installations (1996 NEC), mobile homes, recreational vehicles, or installations where local codes prohibit grounding through the neutral conductor require 4-wire branch-circuit connection. • Improper connection of aluminum house wiring to copper leads can result in an electrical hazard or fire. Use only connectors designed for joining copper to aluminum and follow the manufacturer’s recommended procedure closely.• Mounting screws must be used. 4. Install the junction box cover. To connect a 4-wire circuit, 1. Separate the oven ground and white wires if necessary. 2. Connect the oven ground (green) wire to the branch circuit ground (green) wire in accordance with local codes, using a wire nut. If the residence red, black or white wires are aluminum conductors, see WARNING. 3. Connect the oven white wire to the branch circuit neutral (white or gray) wire in accordance with local codes, using a wire nut. 4.Connect the oven red wire to the branch circuit red (L2) wire in accordance with local codes, using a wire nut. 5. Connect the oven black wire to the branch circuit black (L1) wire in accordance with local codes, using a wire nut. If the residence red, black or white wires are aluminum conductors, see WARNING. 6. Install the junction box cover...^IFV
Sorry, there was a problem. Please try again later.