“Is this can be just plug in when install OR have to be hardwire?”
Answer This Question
1-1 of 1 Answer
Hi there! Thank you for your question about the CBIH3017BE. This model requires a 3-wire or 4-wire single-phase 120/240 or 120/208 Volt, 60 Hz AC-only electrical supply on a separate circuit. It should be fused on both sides of the line, and we recommend using a time-delay fuse or circuit breaker. Please note that the neutral should not be fused. The fuse size must not exceed the circuit rating specified on the appliance nameplate. For the 30" induction cooktop, it can consume up to 8800 W at 240 VAC, requiring a 40 Amp circuit breaker with #8 AWG wiring. The 36" induction cooktop can consume up to 10600 W at 240 VAC and needs a 50 Amp circuit breaker with #8 AWG wiring. You may access this link related to your concern and go to Page 16 for more information: https://www.lg.com/us/support/product/lg-CBIH3017BE.BBKELNA. If you have any further questions or need assistance, please send us a private message on Social Media @LGUSSupport—we’re here to help! —Avril
Sorry, there was a problem. Please try again later.