A:AnswerTo ensure sufficient clearance for water inlet hoses, drain hose and airflow, allow minimum clearances of at least 1 inch (2.5 cm) at the sides and 4 inches (10 cm) behind the washer. ^Daphane
A:AnswerIt doesn't appear switching the doors is possible. You may be able to have your machines switch places. I did that once. But you have to make sure you're washer will still drain properly on the new position.
A:AnswerThe ENERGY STAR® Most Efficient and ENERGY STAR® Certified LG 5.0 cu. Ft. Mega Capacity Smart Wi-Fi Enabled Front Load Washer with TurboWash™ 360° and Built-In Intelligence, Model # WM4200HBA can be installed on the 1.0 cu. Ft. LG SideKick™ Pedestal Washer, LG TWINWash™ Compatible, Model # WD100CV or on the newer 27" LG SideKick™ Pedestal Washer, Model # WD300CB.
Model # WD100CV is a graphite steel finish, but the washer has a Black Steel finish...^Ivan.
A:AnswerYour washer must have wifi an you must setup account which is free,you may also have to turn off your VPN on your phone,any buttons with a star * must be pushed/ hold for three/3 second till you hear a single beep
A:AnswerHello there KenAgain. LG washing machines are originally from South Korea but are made in different countries across the globe with the same quality namely South Korea, the United States, Russia, Poland, China, Egypt, India, India, Thailand, Mexico, and Vietnam. ^Jai.
A:AnswerHello there. Thanks for reaching out. For the LG - 5.0 cu ft. High-Efficiency Stackable Smart Front Load Washer with Steam and Built-In Intelligence model: #WM4200HBA Has a maximum height of 74 3/8 inches tall. ` Jai.
A:AnswerHi, The warranty cover for parts and labor for manufacturing defects and this is from the date of purchase. Direct Drive Motor parts for 10 years, drum for 3 years. ^Vanessa
A:AnswerHi, the model dimensions Product Height 39 inches, Product Width 27 inches, Product Depth 33 1/4 inches, Depth With Door Open 53 1/4 inches. The floor under the washer must not slope more than 1 inch (2.5 cm) from front to back or side to side. Floor Installation- To ensure sufficient clearance for water inlet hoses, drain hose and airflow, allow minimum clearances of at least 1 inch (2.5 cm) at the sides and 4 inches (10 cm) behind the washer. The power outlet must be within 60 inches (1.5
m) of either side of the washer. Here's the installation and clearances manual https://www.lg.com/us/support/manuals-documents?customerModelCode=WM4200HWA&csSalesCode=WM4200HWA.ABWEEUS&category=CT10000010&subcategory=CT10000076. ^Vanessa