A:AnswerThe Griddle, Part # AEB72914204 that can be used on the center grate of the LG 6.3 cu. ft. Single Oven Gas Range with ProBake Convection in Stainless Steel, Model # LRG4113ST can be ordered from any LG Authorized Parts Distributor. It is not included with this model. You can click on the map of the U.S. at http://www.lg.com/us/support/parts-accessories to find the LG Authorized Parts Distributor nearest to you. The grates on the LG 6.3 cu. ft. Single Oven Gas Range with ProBake Convection in Stainless Steel, Model # LRG4113ST can be removed and should be washed in hot soapy water and rinsed in clean water. They are dishwasher safe. ^CP
A:AnswerThe Probake Convection feature on the LG 6.3 cu. ft. Gas Single Oven Range with ProBake Convection® and EasyClean®, Model # LRG4113ST is a feature that improves multirack baking and speeds up preheat times. The fan inside the oven circulates hot air inside the oven to create more even temperature throughout the oven cavity and cook faster than a traditional oven resulting in more consistent browning across the racks, while roasting up to 20% faster overall...^IFV
A:AnswerYes you can if you are using a very large pan. But you won't really be able to use the other burners at the same time. Cook top is extremely tight.
A:AnswerI am curious if you found the answer to your question. I have the same model and the same problem. The smell is noticeable when the oven is on, and the flames are orange in the back of the oven.
A:AnswerThe LP conversion kit is part number AAA75946001. Parts and accessories can be obtained through our parts distributor, Encompass Parts. Their contact number, for placing orders and pricing information, is 866-779-7906. You can also use their website, at https://www.encompassparts.com/ ^CP
A:AnswerThe section where the on/off knobs are sticks out about 1-3/4” from the glass front of the oven door and the handle sticks out about another 5/8”. As it is positioned between my counters, it sticks out about 4-3/4”, from the edge of the counters, which probably sounds like a lot but it is not an issue. The range could possibly be skooched back about another 1” but that is how it was positioned by the installers/delivery people. I’ve attached a couple pics. I hope that helps.
A:AnswerThis looks like an old post but since I was posting for another persons question I thot what the heck. As you can see the sides of the range sit exactly at our counter height which is 36-1/2”. I’m guessing there are adjustment feet but I wasn’t home when it was delivered so I don’t know if any adjustment was made.
A:AnswerThe LG 6.3 cu. ft. Gas Single Oven Range with ProBake Convection® and EasyClean®, Model # LRG4113ST is shipped from the factory configured for use with natural gas. You only have to change the nozzles for it if you are going to be using Liquefied Propane (LP) gas. ^CP
A:AnswerGrates and burner heads/caps can be removed for care and cleaning. For even and unhampered flame, the slits in the burner heads must be kept clean at all times.The burner heads and caps (and the oval burner head and cap assembly) can be lifted off. Do not attempt to remove the oval burner cap.•Wash the burner caps in hot soapy water and rinse with clean water. Run water through the oval burner from the bottom stem to flush out debris.•Use care when cleaning the cooktop. The pointed metal ends on the electrodes could cause injury. Hitting an electrode with a hard object may damage it.•To remove burnt-on food, soak the burner heads in a solution of mild liquid detergent and hot water for 20–30 minutes. For stubborn stains, use a toothbrush or wire brush.•The burners will not operate properly if the burner ports or electrodes are clogged or dirty.•Burner caps and heads should be cleaned routinely, especially after excessive spillover.•Burners will not light if the cap is removed. Shake out any excess water and then let them dry thoroughly. Placing the oval burner upside down will allow the water to drain out more easily. Replace the burner heads and caps over the electrodes on the cooktop in the correct locations according to their size. Make sure the hole in the burner head is positioned over the electrode. Grates should be washed regularly and after spillovers.•Wash the grates in hot, soapy water and rinse with clean water.•The grates are dishwasher safe.•After cleaning the grates, let them dry completely and securely position them over the burners. Foods with high acid or sugar content may cause a dull spot if allowed to set. Wash and rinse soon after the surface has cooled. For other spills such as oil/grease spattering, etc., wash with soap and water when the surface has cooled, then rinse and polish with a dry cloth. To prevent activating the control panel during cleaning, unplug the range. Clean up splatters with a damp cloth using a glass cleaner. Remove heavier soil with warm, soapy water. Do not use abrasives of any kind. It is best to clean the manifold panel after each use of the range. For cleaning, use a damp cloth and mild soapy water or a 50/50 solution of vinegar and water. For rinsing, use clean water and polish dry with a soft cloth. If you are in need of any assistance, have additional questions, or would just like to see our helpful tips, check us out on Twitter @LGUSSupport Facebook https://www.facebook.com/LGUSA/ ^CP
