“I noticed in the photo this doesnt have torsion springs like my current lights, how well will this hold?”
Answer This Question
1-6 of 6 Answers
There are metal plates/wings that stick out from the body at an angle. They create pressure against the inside wall of the can light fixture to stay in place. These have a strong hold that is much strong than other non-spring retrofit light kits I have used. Others have started to sag over time, but these hold their place well, so far.
Sorry, there was a problem. Please try again later.They have "Torsion Clips" which I find to be easier because you can turn the light counter clockwise to release them should you need to replace the light. If you look at the pictures you'll see there are metal "wings", if you will, these are the clips which you adjust by moving them horizontally to the correct size of the can. Once the size is correct you just push the light in place. I have over 15 of these installed and they hold well.
Sorry, there was a problem. Please try again later.I was worried about this too at first, but I now have several of these and they hold very well. No issues with any of them!
Sorry, there was a problem. Please try again later.they are installed in the cans that came with the house and 7 holding ok and 1 or 2 that keep falling down. I dont understand why. These clips are poo. 13 foot drop means im buying another 50 dollar light. Again. #huesucks
Sorry, there was a problem. Please try again later.Holds well. I’ve had no trouble whatsoever, and I have these lights throughout my home.
Sorry, there was a problem. Please try again later.It has 3 metal arms that come out horizontally. That bite into the existing housing
Sorry, there was a problem. Please try again later.