Questions & Answers

Q: QuestionHow do I program my remote to the sound bar so I can use my existing remote to control the volume?

Asked 5 years ago by Remote.

• A:Answer If your other remote is Infrared then you can program the bar. On the audio bar, hold the source button ( about 3 seconds) until you see the LED indicators start to blink a pattern. Next on the sound bar, press and release the function you want to program, ex. 'Volume up" button. Now on the remote you want to use, press the "Volume up" button repeatedly, waiting about a second between each, once the new remote is learned, the soundbar led should blink on each "volume up" press. To program other functions like volume down, repeat entire process substituting the "Volume up" steps with the desired function.

  Answered 4 years ago by JasonCTX

  Helpful (13)Unhelpful (0)ReportAnswer this question

Q: QuestionHow’s the remote? I purchased the Polk audio sigma s1,the one with the subwoofer.the sound was great.but the remote was total junk.i would have to get up and go over to right in front of the sound bar to work.so I returned it.will a universal remote work?

Asked 7 years ago by Beerdrinker12801.

• A:Answer The remote itself is pretty flimsy. It has to be aimed pretty much in the direction of the bar itself, and the buttons are not always super responsive. If you aim it more than 3 feet to the left or right of thebar, or more than a few feet above or below it, it will not pick up the signal most of the time ( this is true for the Comcast and Universal remote which I programmed for the Soundbar as well). My Sony and Yamaha remotes ( and the universal remotes that I ultimately programmed for those bars) can be aimed at a wider range and still be picked up by their respective Soundbars.

  Answered 7 years ago by AZMA

  Helpful (3)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionHi, Seems to go in sleep mode pretty fast, any way to stop that? Thank you. Chris

Asked 5 years ago by Chap.

• A:Answer Turn your sound bar down and your TV up. The problem is that there isn't enough signal from the TV to turn on the Soundbar and keep it on. If that doesn't work reset the Soundbar by pressing on, mode,and Volume Plus Keys simultaneously for 10 seconds.

  Answered 5 years ago by Casch

  Helpful (3)Unhelpful (1)ReportAnswer this question

Q: QuestionHow do you know if the bass and voice functions are turned all the way up if it doesn't display it on the TV screen

Asked 5 years ago by Todd.

• A:Answer The led will flash 3 times

  Answered 4 years ago by Saffordchip

  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionMy Polk sigma solo works but the controls do not. Cannot change volume on the soundbar or with the remote.

Asked 2 years ago by Polky.

Q: QuestionThe settings on my Polk Signa S2 sound bar stick for a few minutes on Aux or HDMI and then return automatically to Optical. How do I fix this?

Asked 3 years ago by MC.

Q: QuestionMy Polk audio signa solo has no sound and is connected via optic to my Samsung 4kUHD TV. I’ve tried to do a factory reset and still nothing happens. Any suggestions?

Asked 4 years ago by Sjpacker17.

Q: QuestionCan we able to add an additional subwoofer for Polk solo signa. If so which one is better

Asked 4 years ago by D.

Q: Questionwhat is the name for bluetooth

Asked 4 years ago by Scoober13.

Q: QuestionHow many decibels?

Asked 4 years ago by Anonymous.

Q: QuestionCan I add a powered subwoofer to my polk solo ge soundbar?

Asked 5 years ago by Anonymous.

Q: QuestionI bought an insignia fire tv with a voice remote and a polk signa solo soundbar. Is there a way to use the voice remote for the soundbar?

Asked 5 years ago by Deb.

• A:Answer I haven't been able to do it properly. If I leave TV speakers on I can use the remote to control both but the audio doesn't sync. If I turn the TV speakers off I can't use it to control the soundbar. It's a fire TV so I guess it's programmed differently than other TV's.

  Answered 3 years ago by Anonymous

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWhat’s the watts

Asked 5 years ago by Dumbbo.

Q: QuestionDoes this have any blue tooth speakers wireless that you can add to?

Asked 5 years ago by Yard.

Q: QuestionSuddenly stopped working, I connected to TV, bluetooth, aux and still not working, please help

Asked 5 years ago by Yoniman.

Q: QuestionHi. How do you keep this one from going into sleep mode?? Thanks!

Asked 5 years ago by Chap.

Q: QuestionDoes this have an HDMI ARC connection? Or is it only optical?

Asked 5 years ago by mnarcher.

• A:Answer The Polk Signa Solo does not have an HDMI ARC connection. It is only optical

  Answered 5 years ago by CECVSXLX103Verified Purchase

  • 
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWe just set up this new sound bar with our sharp roku tv and we cannot get it to work properly. Sound is coming out of the sound bar but it’s very very quiet and then randomly will be loud for a second then quiet again. Is this a defective product?

Asked 6 years ago by Kdhd.

• A:Answer Make sure optical cord is snapped into place . Also try digital audio cable to see if that works! If not it may be defective.

  Answered 5 years ago by Techguru

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWhat is the power output wattage?

Asked 6 years ago by Jrgspyder.

• A:Answer 120

  Answered 6 years ago by gumball

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionThe TV we want to use this for is mostly used with a Roku. Will the bar work with Roku streaming? Thank you

Asked 6 years ago by lid91.

• A:Answer Yes, this soundbar is compatible with Roku streaming .

  Answered 6 years ago by CommunityAnswer

  Helpful (2)Unhelpful (1)ReportAnswer this questionShow more answers (2)