1-3 of 3 Answers
Screw it whenever you want it to be
Sorry, there was a problem. Please try again later.Hi Wittles63. Thanks for asking. The Ring Stick Up Cam can be installed to sit on a flat surface, or it can be installed on a wall. If you would like to mount your Stick Up Cam to a wall or other surface, we recommend visiting our support center for a full step-by-step installation guide: https://ring.com/support/articles/79grg/Installing-Stick-Up-Cam-gen-3-battery-solar. We invite you to reach out to our Community if any additional information is needed regarding your question. The Ring Community is our first peer-to-peer community forum, giving our customers the ability to help one another by sharing their feedback and experiences with each other. All the best, Nicole from Ring.
Sorry, there was a problem. Please try again later.Hi Wittles63. Thank you for taking the time to reach out to us with your question. We have included the installation instructions for the Ring Stick Up Cam here: 1. Fully charge the provided battery using a USB power source and the orange cable until the battery’s LED light is green. 2. Remove the battery cover. Twist the battery cover counterclockwise to unlock, then remove it from your Stick Up Cam. 3. Choose the spot where Stick Up Cam can provide the view you want. 4. Unscrew the base using a standard Philips-head screwdriver. 5. Attach the smaller end of the Stick Up Cam Mount to the rear of the Stick Up Cam. Screw it into place using the large silver screw that comes in your Stick Up Cam Mount packaging. 6.Attach the rubber pad. Be sure that the white rubber pad is attached to the base of the Stick Up Cam Mount. Otherwise attach it by pushing the rubber pad into the base of the mount. 7. Once you've attached the mount to the back of your Stick Up Cam, swivel the mount so that the base is above the camera. 8. You will not be able to change the orientation of upside-down videos in the Ring app. Make sure to install your camera right side up. We recommend getting an adjustable Stick Up Cam base if you need addtional mounting options. 9. Place the Stick Up Cam where you want to mount it, rubber side down. 10. Use the three mounting screws to secure the Stick Up Cam Mount base to the ceiling. Important: Use the enclosed drill bit to drill holes in the ceiling, then push the enclosed anchors into the holes when installing on masonry or stucco. 11. Slide the back cover of the Stick Up Cam back into place. Use the star-shaped end of the screwdriver included with the Stick Up Cam to tighten the attached screw. If any additional information is needed regarding your Ring Stick Up Cam, please reach out to our community. Ring Community is our first peer-to-peer community forum, giving our customers the ability to help one another and share their feedback and experiences directly with Ring. Thank you, Melissa from Ring.
Sorry, there was a problem. Please try again later.