“Mount to Vizio Soundbar My Vizio soundbar has two holes on the back that are threaded for screws, but it didn't seem to work with the instructions on this mount. Has anyone used this to mount a Vizio s4221w-C4 soundbar? What screws do you use and how did you do it?”
Answer This Question
1-5 of 5 Answers
As I recall, there were NUMEROUS screws which came with this mount. My recommendation would be to test several different sizes BY HAND (do not use a screwdriver) to see which screws fit the threads correctly. If the screws seems to be too tight to turn them by hand, they're probably too large, and you should try a slightly smaller size. If you try to force a screw that's too large, you could strip the threads in the soundbar. Honestly, I ended up returning mine, as there was just too much hardware for the space I needed to span. Check out my full review if you're interested.
Sorry, there was a problem. Please try again later.I used I believe was the M4 screw with a washer. Installed the brackets differently from how the instructions were.
Sorry, there was a problem. Please try again later.Use the threaded holes in the brackets to mount using one of the thru holes in your tv mount bracket That's what I did
Sorry, there was a problem. Please try again later.Hey my man have a Vizio TV 48 inch as well as that the sound bar it does have the screws it's best to unmount the TV entirety place it down on a table or somewhere soft I would use a blanket secondly using the existing wall mount unscrew the bottom part of each of the wall mounting kit, next using the sound bar mounting equipment you're going to place each one of those similar to a parentheses ex ( ) you're going to have to use the longer screws that are provided with the mounting bar screws thread it so it doesn't crack your screen shouldn't be that long in terms of the screws you're using to the existing TV mounting you just want the screws long enough to where it will hold the sound bar kit. Next you will lineup to some bar to make sure you have about an inch clearance between the TV once you do lineup the bottom part of the mounting kit to the sound bar and time as you need to go make it snug but not incredibly hard because when you mount the TV back on the wall you can adjust the space between the sound bar and the TV it sounds way more difficult than I making it once you get it down you'll see when I'm talking about good luck it literally took me less than five minutes to attach the mounting kit to the existing TV...
Sorry, there was a problem. Please try again later.Does it have regular wall mount holes if so I had the same problem but I just went to Home Depot got a bolt that would work for it along with washers and nuts and it works great
Sorry, there was a problem. Please try again later.