“Unable to use card When I placed a new card in my camera- Konica Minolta DImage Z6, I am getting the code "unable to use card"... This is the correct card to use, so what is the problem? It freezes up the camera so I am not able to format it, I can only turn it off. This is frustrating, please help. Thanks”
Answer This Question
1-10 of 11 Answers
It may be this card is too slow for your camera. You may have to use Ultra or Extreme cards. Look for Class 10 cards as a minimum for cameras. This is a class 4 card.
Sorry, there was a problem. Please try again later.You need sd card not sdxc
Sorry, there was a problem. Please try again later.Check to see if you have the card in the lock position. This is located usually on top left side of you card. Slide it back to unlock the card. The locking slide allows you to prevent recording over any previously recorded material. Cheers!
Sorry, there was a problem. Please try again later.is the lock on.
Sorry, there was a problem. Please try again later.Have you tried formatting it in a pc or lap top? You may have to get an adapter. Recently increased card size in my gps and I had to format the card with my pc before proceeding.
Sorry, there was a problem. Please try again later.Check and make sure the over write slot isn't in the wrong place! If it is in write protected it won't work!
Sorry, there was a problem. Please try again later.Verify that it is not locked on the side tab. This is called write protect. I have had good success Some devices are limited to the size of the card they accept as well.
Sorry, there was a problem. Please try again later.You may be able to format it via your computer with a SD card reader. If that doesn't work, your camera may not be able to handle the size of card this is.
Sorry, there was a problem. Please try again later.Try formatting in your computer and that might help out. I hope that helps.
Sorry, there was a problem. Please try again later.Pam, if you are not able to format the card it is possible that the card is bad. I've had this happen before. I would try another card if you have one just to make sure that its not an issue with the camera.
Sorry, there was a problem. Please try again later.