A:AnswerWhile playing Dolby Atmos content click the effect button on the Vizio remote. Scroll down to ElvLEDNext. Then just hit the ok button. It should change colors every time you hit the ok button as long as you're playing Atmos content!
A:AnswerVIZIO recommends keeping the subwoofer within 25 feet of the sound bar to maintain connection. The rear satellite speakers would need to be physically connected to the subwoofer.
A:AnswerModel M512e-K6 Please visit support.VIZIO.com and click on ‘Contact Us’ or for instant support download the VIZIO Mobile app, then click "Support" and "Contact Us".
A:AnswerModel M512e-K6 The optical port is located under the USB port on the back of the sound bar if you have additional questions please visit support.VIZIO.com and click on ‘Contact Us’ or for instant support download the VIZIO Mobile app, then click "Support" and "Contact Us".
A:AnswerModel M512E-K6 I would like to offer the assistance of our award-winning technical support team with this issue. Please visit support.VIZIO.com and click on ‘Contact Us’ or for instant support download the VIZIO Mobile app, then click "Support" and "Contact Us.
A:AnswerModel M512e-K6 does come with wall mount brackets for the rear speakers but the screws would need to be purchased. The size suggested screw size is 3.5mm diameter and 1.63" minimum length (two screws would be needed).
A:AnswerSadly, the wattage is not a measured spec for this model. Here is some additional information regarding sound and power.
System Frequency Response 45Hz - 20kHz
Sound Pressure Level (dB) 103dB
Power Frequency 100V-240V/50-60Hz
Thanks!
A:AnswerThe power cord included with the TV, in the box when purchased, is the same cord that the factory will use to test the TV and provide quality assurance. VIZIO recommends to only use the power cord included in the box when purchased.
