A:AnswerHi - We are sorry to hear that you are having issues registering the IS6200 to the VTech DS6771-3.
Here's the step on how you can register the headset to the telephone base.
Step 1: Make sure that the headset is out of the charger. Headset charger must be right next the telephone base during registration.
Step 2: Press and hold the FIND HANDSET button on the telephone base for four seconds or until the IN USE light turns on.
Step 3: Release the FIND HANDSET button then place the headset on the charger. It will take about 60 seconds for the registration to be completed.
If this does not help, you can contact our Customer Support at 1-800-595-9511. We are open from 9:00 AM to 3:00 PM, Mondays through Fridays.
Thank you,
-VTech Support
A:AnswerHi - The VTech IS6200 has to be registered to the AT&T TL86109 via DECT 6.0 technology and not via Bluetooth. Here's the steps on how to go about it.
Step 1: Remove the headset from the headset base or charger.
Step 2: Press and hold HOLD on the telephone base for about four seconds until it shows Registering...Please wait. Then, release the button.
Step 3: Place the headset back to the headset base or charger
Step 4: It takes up to 60 seconds to complete the registration. When the registration completes, the telephone base displays HEADSET Registered and you hear a confirmation tone.
Thank you,
-VTech Support
A:AnswerGO TO VTECH.COM THEN ACCESSORIES AND IT WILL GIVE U A LIST OF PHONES THAT ARE COMPATIBLE, I THINK I DO REMEMBER SEEING ONLY AT&T AND VTECH PHONES
A:AnswerJoe - We are sorry to hear that you are having issues registering the headset to your VTech LS6425-3. Make sure that the IS6200 is right next to your telephone base during registration. The headset charger must also be connected to an AC outlet. If this does not help, you may need to deregister all existing devices from your telephone base then re-register them one at a time.
If you have other questions, please contact our Consumer Sales and Service Center between the hours of 9:00 AM and 3:00 PM Monday through Friday at 1-800-595-9511.
Thank you,
-VTech Support
A:AnswerHi - The DS6151-11 or DS6101-11 are not compatible with any cordless headset. The two line phone unit compatible with the IS6200 is the model DS6251-2. Thank you!
A:AnswerHello - The IS6200 is not compatible with the CS6649.
You can view the compatible phones tested to work with the IS6200 by using the link below.
https://cdn-media.vtechphones.com/products/IS/IS6200/IS6200%20compatibility%20list_20170216_a.pdf
Thank you
-VTech Support
A:AnswerHello. Try the following to get the IS6200 to register to the TL86103 base: 1. Remove the headset from the charger. 2: Press MENU on the base. 3. Scroll to Settings, the press SELECT. 4. Scroll to Registration, press SELECT. The base will show Registering... Please Wait. 5. Place the headset in the charger. Allow up to 60 seconds to register. If you have issues, please call AT&T Telephone Support. Thank you!
A:AnswerHi - We are sorry but the VTech IS6200 will not work with the CS6328-3. This is only compatible with some of the VTech and AT&T DECT 6.0 phone system such as CS6929-3, CS5158-3 or DS6251-3. Thank you for your interest! ~VTech Support
A:AnswerHi - We are sorry of you had difficulties registering the VTech IS6200 headset on your AT&T telephone system. Here's the instructions on how to register your headset: Step 1: Press and hold the /HANDSET LOCATOR button on the telephone base for about four seconds until the IN USE light turns on, or the base displays "Registering... Please wait." Then, release the button.
Step 2: Immediately place the headset in the headset charger. The ON/OFF light on the headset flashes quickly and alternately in red and blue to indicate the registration is in progress. This may take up to five minutes to complete. The ON /OFF light on the headset turns red when it is registered and charged. You hear a confirmation tone.
Step 3: Lift the headset, then press ON /OFF key on the headset. If you hear a dial tone, the registration was successful. Hope this helps! ~VTech Support
A:AnswerNo. This headset is used to pair with a traditional land line/VOIP phone line. If you have a landline and you set up your cell phone to call forward to your landline then this could work.
A:AnswerHi - The IS6200 is not compatible with the AT&T ML17929. You may refer to this link for the list of compatible phones that have been tested to work with the headset: https://cdn-web.vtp-media.com/products/IS/IS6200/IS6200_compatibility_list_US_20190117.pdf.
Thank you,
-VTech Support
A:AnswerHello - We are sorry to hear that you are having issues registering the headset to the VTech CS5119-2. The headset will announce "Out of range" if it is still registered to a different base. You can manually delete the registration of the headset by completing the following steps.
Step 1. Remove the headset from its base.
Step 2. Press the key sequence: VOL+, ON, VOL- , ON. VOL+, VOL-, ON.
Step 3. The headset LED will flash blue and red indicating it is not registered.
Step 4. Register the headset to the telephone base of the CS5119-2
If you are still having issues, please contact our Consumer Sales and Service Center between the hours of 9:00 AM and 5:00 PM Monday through Friday at 1-800-595-9511.
Thank you,
-VTech Support
A:AnswerHello. VTech cordless headsets will be compatible with VTech and AT&T branded telephones only. We do not expect this headset to be compatible with Panasonic phones. Thank you.
