A:AnswerHello Bob321! The dimensions are: Depth 15 9/16", Height 17 1/8", Width 29 15/16". Unfortunately, we do not have the dimensions from the rear to the vent fan. Thank you for your inquiry on our Whirlpool appliances.
A:AnswerHello DAB! The net weight is 55.9 pounds. We would recommend following the Installation Instructions for proper installation of the unit. Thank you for your inquiry on our Whirlpool appliances.
A:AnswerHello Grady! The only difference is the year the model came out. WMH31017AS came out before WMH31017HS. So WMH31017HS would be the newer model. Thank you for your inquiry on our Whirlpool appliances.
A:AnswerHello mmd, for manual cooking/stage cooking, touch COOK TIME, touch number keypads to enter time, touch
COOK POWER (if not 100%), touch number keypads to enter
power level (10-90), then touch the Start control. We hope this helps.
A:AnswerHello Steve, this appliance is operated by a one-size 2-Speed, 300 CFM Motor Class. With a 2-speed fan you match the right amount of ventilation to the dish being prepared and quickly get rid of cooking odors with two different fan speeds. We hope this helps.
A:AnswerHello Edamamemama,
Programming tones may be
turned off, or all tones (including end-of-function signals) may be
turned off. To turn off programming tones, touch and hold number
keypad “1” for about 3 seconds, until a confirmation tone sounds.
We hope this info helps.
A:AnswerHello morrispete, Touch COOK TIME, touch number keypads to enter time, touch
COOK POWER (if not 100%), touch number keypads to enter
power level (10-90), then touch the Start control.
A:AnswerHi Bill, there is no "dimmer" switch for this model, however, there is a work around that might work for your purposes. Here is the link to the Owner's Manual https://bit.ly/3jPZ0OS on page 3 see "Standby Mode" and see if this will get the result you're looking for. We hope this helps. Please don't hesitate to reach out for further assistance if needed at Whirlpool 866-698-2538 M-F 8 AM to 6 PM ET.
A:AnswerHello! Programming tones and signals. Programming tones may be turned off, or all tones (including end-of-function signals) may be turned off. To turn off programming tones, touch and hold number keypad “1” for about 3 seconds, until a confirmation tone sounds. Repeat to turn back on programming tones. To turn off all tones, touch and hold number keypad “2” for about 3 seconds, until a
confirmation tone sounds. Repeat to turn back on all tones. We hope this helps.
A:AnswerI don’t know that for sure and doubt Whirlpool customer service would tell you. But, I replaced an 11 year old Whirlpool microwave and everything was exactly the same. Didn’t have to install new bracket. So, I’d be surprised if it wasn’t the same.
A:AnswerWhat about the 2023 model? If not that was a big mistake
I have to turn on another light to punch in the numbers especially earlier in the day.
