Questions & Answers

Q: QuestionWhat trim kit would i need if my dimensions are 28.5 inch wide and 15.5 inch wide?

Asked 4 years ago by Bevo.

• A:Answer Hi Bevo, that will depend on the model Microwave. There are different kits available for different models.

  Answered 4 years ago by WhirlpoolTeam

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this trim kit work with : Whirlpool - 1.1 Cu. Ft. Low Profile Over-the-Range Microwave Hood with 2-Speed Vent - Stainless steel

Asked 4 years ago by Boyd.

• A:Answer Hi Boyd, our Low Profile over the range Microwave Hoods do not have an associated trim kit available. They are meant to install directly over a standard 30" range where the vent hood would normally be installed. Thank you for your question.

  Answered 4 years ago by WhirlpoolTeam

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill the MK2227AZ trim kit fit on a cabinet opening of 25.5" x 16.75"?

Asked 4 years ago by DPOnitram.

• A:Answer DPOnitram, this Trim Kit needs a cutout height of 17 inches and a cutout width of 25 1/2. We hope this helps!

  Answered 4 years ago by WhirlpoolTeam

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWhat trim kit goes to model number WMC50522HB? It would be helpful if you added the trim kit as a recommended purchase.

Asked 4 years ago by Ellen.

This question was asked about the related product: Whirlpool - 26.9" Trim Kit for Microwaves - Black

• A:Answer Hi Ellen, the 27" trim kit for this unit is #MK2227AB and here is the link: https://bit.ly/3wuvlPP The 30" trim kit for this unit is #MK2220AB and here is the link: https://bit.ly/3wzzou2

  Answered 4 years ago by WhirlpoolTeam

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWhat is the correct trim kit for Whirlpool - 1.6 Cu. Ft. Microwave with Sensor Cooking - White Model: WMC30516HW?

Asked 4 years ago by Angel.

This question was asked about the related product: Whirlpool - 26.9" Trim Kit for Microwaves - White

• A:Answer Hi Angel. The Trim kit for that model is 30" MK2160AW and 37" MK2167AW. We hope this helps.

  Answered 4 years ago by WhirlpoolTeam

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionDoes this come with the bottom plate and side rails for the microwave to sit on?

Asked 4 years ago by rastone.

• A:Answer Hello rastone, This unit does come with the rails and bottom place. We hope this helps.

  Answered 4 years ago by WhirlpoolTeam

  
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWhich stainless steel trim kit should I use for a Whirlpool mt9160xeq0 microwave? (which is white)

Asked 4 years ago by JohnM.

Q: QuestionCan the whirlpool 27 trim kit for microwave fit the LG lmc2075bd microwave. I need a 27" trim kit as the 30 inch for the LG will not fit due to my cabinet width? Looks like the same one and I assume will match color close enough

Asked 4 years ago by gregM.

This question was asked about the related product: Whirlpool - 27" Trim Kit - Black stainless steel

Q: Questiondoes this trim kit fit the wmc30516hz mircowave

Asked 4 years ago by paulieb.

Q: QuestionDoes this trim kit work with KitchenAid 21 3/4" Countertop Microwave Oven? Model: KMCS1016GSS The User Care Guide says use the following trim kit: 27inch Model: MK2167AS. Will this 21 3/4" microwave fit in 27in trim kit?

Asked 4 years ago by GetSet.

Q: QuestionWhat trim kit do I need for model WMC50522HZ?

Asked 4 years ago by Ferd.

• A:Answer Hi Fred,the 27 inch trim kit model no: is MK2227AZ.Thank you for your inquiry on our Whirlpool appliances.

  Answered 4 years ago by WhirlpoolTeam

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: Questiondoes this trim kit work with the KitchenAid - 2.2 Cu. Ft. Microwave with Sensor Cooking - Stainless steel Model:KMCS3022GSS?

Asked 4 years ago by Katie.

• A:Answer Katie, the recommended trim kit for your Microwave is MK2227AS.

  Answered 4 years ago by WhirlpoolTeam

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWhat trim kit do I need to buy for an older microwave model W10434228C Thanks

Asked 4 years ago by Crisco.

Q: QuestionWhat are the inside dimensions of the trim kit (opening that the face of microwave will extend through)?

Asked 4 years ago by BigBird.

Q: QuestionWill this work with model wmc30516hb.

Asked 4 years ago by Grobro.

This question was asked about the related product: Whirlpool - 26.9" Trim Kit for Microwaves - Black

• A:Answer Grobro, the recommended trim kit for this Microwave is MK2160AB.

  Answered 4 years ago by WhirlpoolTeam

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI am looking to purchase the 27" single wall oven, microwave and trim kit. The finishes have different names. What is the same finish as "Heritage Stainless Steel" so they will match? And which microwaves fit the 27" trim kit EXACTLY?

Asked 5 years ago by Diane.

• A:Answer Diane, did you have a specific model number for your appliance you are looking at?

  Answered 4 years ago by WhirlpoolTeam

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionHello, I have Microwave WMC30516HZ and bought the trim kit MK2167AZ, but the trim kit appratus on the back does not sit flat so the trim kit protrudes out. What am I doing wrong?? Do I have the compatible trim kit?? thx

Asked 5 years ago by RJ.

• A:Answer I had the same problem. Either cut a hole in your cabinet or sand down the parts of the trim kit that prevent it from laying flush. I had already cut out other holes for part of the trim kit, and I didn't want to hack away even more of the cabinet frame (damaging its stability), so I sanded the protruding parts of the trim kit down. Takes a bit of time however. Good luck - Greg

  Answered 5 years ago by GregVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionMy cabinet cut out is 24 inches wide. Would the inside dimensions of the trim kit fit my cut out? I have Model #WMC30516HZ

Asked 5 years ago by matheriot.

• A:Answer Hello matheriot! Please see the link for more information on the dimensions. https://go.aws/2M7anRf

  Answered 5 years ago by WhirlpoolTeam

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionIs this trim kit comparable with the Whirlpool WMC30516HB? Thank you.

Asked 5 years ago by Lisa.

This question was asked about the related product: Whirlpool - 26.9" Trim Kit for Microwaves - Black

• A:Answer Hello Lisa, the trim kit needed for that model is MK2160AB. We hope this helps.

  Answered 5 years ago by WhirlpoolTeam

  
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: Questionwhat is the model number of the trim kit for model WMC30516HZ

Asked 5 years ago by Erich.

• A:Answer Hello Erich, the 30" trim kit would be MK2160AZ and the 27" model is MK2167AZ. We hope this helps.

  Answered 5 years ago by WhirlpoolTeam

  
  Helpful (0)Unhelpful (0)ReportAnswer this question