Questions & Answers

Q: QuestionDoes it support Alexa?

Asked 2 years ago by Zaid.

• A:Answer Yes.

  Answered 9 months ago by terry

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionCan you adjust the BASS on each speaker individual output

Asked 2 years ago by Mike.

• A:Answer Yes and No, if ur looking for a bass up or down then no. Each speaker can be raised or lowered independently in the menu. This is a high end receiver and should have a sub attached, I have two. The amp let’s u set up the crossover levels to determine the bass frequency crossover to each speaker and what’s diverted to the sub(s) I have the rx-a4a connected with 2 Paradigm performance series towers, paradigm center, M&K MX 12 sub, Klipsh Premier 12 sub and 4 Cambridge audio Minx min22s for rear surround and high overhead up front for front Dolby Atmos. Have it connected to an LG G1 77”. With recent firmware updates everything seems to be working really well. PS5 looks and sounds amazing.

  Answered 2 years ago by TonyVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionDoes it have blur tooth capability for hear phones

Asked 2 years ago by Chief.

• A:Answer Wi-Fi, Bluetooth, AirPlay 2 and Spotify Connect Yes, Bluetooth is

  Answered 9 months ago by terry

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionCan the remote work through drywall? TV and speakers are built into the wall, receiver is on a rack behind the drywall

Asked 3 years ago by Karlbrad.

• A:Answer No. But you can use an IR repeater to solve that issue. The device transmits the IR signal of the remote to a separate room.

  Answered 9 months ago by terry

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWant to purchase the Yamaha RX-4A4 Receiver but don't know what the delivery is??? Please adbvise so I can order here or else where...

Asked 3 years ago by GuyV.

• A:Answer I pasting my review if that helps. Yamaha: Its $1500 and front display is very poor and cant read/see from a distance of just 6 feet. What is the use of such display? Packing box and protection provided inside by thermacola is very poor. Initial setup guid is missing...only asks for network connection. Missing Denon like features where it will show on screen what is the input source audio codec and video details. Missing quick menu to switch to classic 2 channel stereo which is still the dominant audio codec. Remote is nice but much needed quick access like movie music game modes are missing. Bestbuy: This is $1500 product, please ship it in a exterior package that conceals the inside of it and also protects it. AMAZON does this for expensive products.

  Answered 3 years ago by CHETANVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionTwo questions - 1. Can i add an amplifier to make it 5.2.4? 2. If i use two subs, will the Receiver send different output to both or same? Thanks in advance.

Asked 3 years ago by Sandy.

• A:Answer Yes, it does have pre-outs. And that allows additional amplifiers. It also has a trigger output to turn on the amp when the receiver is powered on. Most av receivers that have multiple sub outs have the option of mono or stereo outputs.

  Answered 9 months ago by terry

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionIf i add an external amp for front left and right channels can i reassign zone 2 to be used as a height channel for a 5.2.4 configuration?

Asked 3 years ago by TVbuyer.

• A:Answer I don't believe that the additional zones go through equalization. So, I would say no.

  Answered 9 months ago by terry

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWhat is the distance between the front and back legs of the unit? I’m trying to determine if it will fit on my media cabinet.

Asked 3 years ago by WI427.

• A:Answer You would need to bring along a tape measure to the store. The specs only report the external dimensions.

  Answered 9 months ago by terry

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionCan Zone 2 be Reassigned to rear height channels with an external amp?

Asked 3 years ago by TVbuyer.

Q: QuestionDoes the receiver have real HDMI 2.1 now with 8K60 and 4K120 with over 40 GBPs?

Asked 3 years ago by Whitewolfdakota.

Q: QuestionIs RX A4A more suitable for bi-amplification than the RX A2A or are they the same

Asked 3 years ago by oldtimer.

• A:Answer Both supports bi-amplification (as stated in the user manual). The A4A is using the same component as the A6A and A8A and YPAO is much more powerful. Just for that, and not the difference in power (100 wpc vs 110 wpc), I'd consider the A4A over the A2A.

  Answered 3 years ago by bitonio

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionIs the amp really only 100W for 7 satellite speakers? Seems a bit low. My Yamaha RA1O2O is 700W. I have 7 Klipsch satellites 4 G-12 and 3 G-16 each rated 75W and 100W respectively. So only need 500W. My 2 powered Klipsch subs dont need any amp power.

Asked 3 years ago by MikeySLC.

• A:Answer It's 110W per 2 channels, not for all channels. I don't know the specs if you use more channels, but my 5 channel system sounds great and is plenty loud enough for me.

  Answered 3 years ago by LorenVerified Purchase

  Helpful (1)Unhelpful (1)ReportAnswer this questionShow more answers (1)

Q: QuestionWhen will this product be released and are you taking preorders?

Asked 3 years ago by Ellie.

• A:Answer It is released and available as of 9/3/21, and today on 9/13/21, it is a 3 day shipping time.

  Answered 3 years ago by JDThird

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionYamaha's site shows this as a 110w system, not 80. Is this just a typo on the Best Buy page? Even the smaller A2A shows 100w on Yamaha's site. None of the new series Aventage show only 80w of power.

Asked 3 years ago by JDThird.

• A:Answer BestBuy is simply wrong/typo. Just as it's 7.2 and not 7.1. Always trust the manufacturer for specifications.

  Answered 3 years ago by illthreat

  Helpful (1)Unhelpful (1)ReportAnswer this question

Q: QuestionHow many watts 5 channel driven with this receiver?

Asked 2 years ago by Tanner.

• A:Answer It has 115 watts for two channels. The watts for 5 channels would be lower. The manufacturers don't typically put that in the specs. It just depends upon the capacity of the receiver's power supply. Yamaha generally puts "robust" power supplies in their high end amps & receivers . But my guess is around 70 -80 % for the 5 channels. And the subs have their own amps.

  Answered 9 months ago by terry

  Helpful (0)Unhelpful (1)ReportAnswer this question

Q: Questionis this really a 7.2 i only see 1 sub hookup not 2

Asked 2 years ago by python.

• A:Answer RX-A4A AVENTAGE do have 2 subwoofer ports. For a dual sub setup.

  Answered 2 years ago by AnonymousVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)