Customer Ratings & Reviews

Just ordered again for a new computer. Used this item before and the holes lined up perfectly with the SSD drive and the computer case. Didn't want to chance purchasing the slightly less expensive competitive item which apparently is flimsy and sometimes doesn't fit properly.

I used this in tandem with a few adapters for my 2001 imac and it mounted perfectly. Really happy with the quality of the build. Be careful not to bend it too much and try slotting your drive into the fromt so you dont bend it. Got this saved if I ever need to purchase another one. Best one out there and good for the price of ten bucks.

Needed this enclosure for my ssd drives , I got this one on sale and it was a bargain . It is well made and has all the screws you need to fasten two ssd’s.

This drive enclosure worked good, fit my computer case with no problems.

Cheap price, with great quality, specially from Corsair, fits my HP 8300 SFF

Simple and cheap and can hold multiple SSDs. Couldn’t really ask for more.

Why 5 stars? Because it's always so cool buying stuff at Best Buy, knowing you're gonna get the product exactly like was advertised; It's gonna be good quality and at a good price. This particular bracket let me easily mount and install an additional SSD (SATA), in and out in 10 minutes. The bracket is perfect for holding either 2.5" or 3.5" drive, or both.

Does what it says. Able to mount 2 ssd in one hdd slot

Needed a 2.5" enclosure for two SSDs I was installing and came upon the CORSAIR Dual SATA Drive Enclosure for 2.5" SSD Drives. Never realized they made such things! lol Killed two birds with one stone so to speak. In fact, the price at Best Buy was cheaper than if I were to buy two separate enclosures for each drive. I have a few CORSAIR components in my system and have always been satisfied with the quality so it was an easy decision to purchase this.

It worked well to mount 2 SSDs. The reason for only 4 stars was that unfortunately my older full tower case has "sled" type trays to put in hard drives and this ended up being about 1/8" too long to latch the sled into place. I am not sure if case standards have changed their dimensions over the years for such things.

It is solid and holds up my 77” tv to the wall. I would definitely recommend.

These 3.5" Bay-adapters are great for adding one or two 2.5" SSD and/or SATA Hdd's to a desktop PC for better performance!

This was a perfect addition, I needed the space saving in my new tower computer I have 2 SSD drives and 3 standard drives.

Great little caddy. Just make sure not to lose the screws. Otherwise, its exactly what you would want a metal tray to handle 2 2.5" drives in one 3.5" bay.

The tabs that hold the 2.5" drive are offset on the tray. This means that if you are using a bay or shuttle tray that aligns to ports permanently mounted on a board or other surface, this "adapter" will not work. To explain another way: a 2.5" drive mounted in this enclosure will not line up the same as the Data and Power Ports on a 3.5" Sata drive. This tray will *hold* a 2.5 drive, but you will only be able to hook it up with free moving data and power cables.

I needed to mount a small SSD in my Dell computer - which only has 3.5 full sized slots. After some consideration I ordered this one. I find it to work very well, with no tools required to mount the SSD. The device has two levels, so that dual SSD can be mounted. The SSD slides in and fits snugly, and is held in place by a couple of plastic tabs.. Then the entire assembly went into the computer exactly right. I have no complaints at all about this model. They include four small screws to secure the holder into the bay, but those were not needed, because Dell has sliding removable mounts.

This is basically a mounting bracket for installing 2.5" SATA drives into a standard computer drive bay. It seems well designed to do that job efficiently. I used it to install two SSDs into my new computer. All the holes matched up perfectly. It is handy that there are little tabs supplied to support the drives, which makes attaching the screws much easier. Works for one or two drives. Seems well finished with no sharp edges to worry about. Glad that the screws were included, as my drives came without screws.

Finally found one of these in stock at a Best Buy store, which wasn't an easy task. To be clear, this adaptor is NOT meant for those newer, skinny SSD drives drives that pug into an M2 socket. It is for the older style SSD drives that use a SATA cable and separate SATA power connector. You may install up to two drives in this bracket. The bracket can then be installed in a 3 1/2 inch floppy drive bay (remember those?), or an old school 3 1/2" hard drive bay. Many newer pc cases have a place where you may mount an SSD drive without needing one of these brackets, but if you are upgrading an older computer and trying to install an SSD drive, you will probably need one of these. It came with mounting hardware. Very simple to install. Not much else to say about this. It's a mounting bracket.

Needed this in order to install an SSD into a 10+ year old PC after cloning from an older drive. Fits right into where the 3.5 HDD originally was installed and fairly painless to install. Definitely recommend.

This is a solid, well-designed product. There's not much that can be said about an internal drive enclosure, but I just upgraded all the PCs in our office, and I used one of these in each. Simple to use, and all mounting screws were included. Remember to purchase cables, if you think you'll need them.