Customer Ratings & Reviews

Extremely versatile, fantastic airflow and relatively good build quality. It doesn't feel super substantial and the metal is a bit on the thinner side, but when it's completely assembled it's actually very solid. So many options for cooling configurations and the GPU sag adapter actually works even though it's pretty far in the back...just make sure that it isn't jabbing into your GPU fans and use the included pad if necessary. My biggest issue is that I have a 280mm AIO. It will fit in the top or the front, but I really wanted to put it on the side and it does not fit. If I put it in the front it's too deep to put side fans so it basically has to go on the top which is not ideal in my opinion. You also need to make sure that you have room for the motherboard 24pin cable coming from the back if you have fans on the side...I ended up going with 2 140mm fans to space it out a bit. With all that said the airflow and cooling difference was drastic from my old case (BeQuiet). I really like the magentic filters and the height was really important because of where it sits. The bottom line is this...it's a really nice case, extremely versatile, but make sure that you take some measurements if you are using AIO's and I'd really recommend staying with 120mm fan based AIO (240 or 360mm) because with 140mm you will run into clearance issues in some configurations.

I was in the market for a solution that was a little more compact than my ASUS T-501 mid tower that was closer to a full tower than I would like. The 501's size barely met the requirements needed to suspend the case on the Secret labs mount for my Magnus pro XL. Enough on the reasoning. Now about the case. I love the look, the size is perfect and the modularity is very cool. I love the integrated GPU support. Fit and finish is excellent, especially in this price range. Pros: It is the perfect size for mounting to my sit stand desk, air flow is excellent and can be increased by removing plastic like inserts in the "basement " to allow for more airflow. I chose not to and things are still nice and cool with the CPU idling in the 32 C range on a Corsair AIO. Cons: It would be nice to have the option of having IO interfaces on top but it really is not a big deal since I have a U-Green hub , monitor hubs and keyboard hubs. It would be a rare occurrence that required the use of the cases front panel IO interface. Its a little tight getting a 140 mm exhaust fan on the back but doable.

This case was a little intimidating at first to work with but once you figure out how everything is mamaged inside, its a very easy case to work with. Installed an ultra 7 processor with 360 aio with no trouble at all. The msi z890 fits like a glove, no need to remover rear port braket. The front case fans can get loud easily but i was able to manage it with the msi softeare.

I love this case! I build a lot of computers since I work in IT, and I’ve always been a fan of the Corsair 4000D/5000D series. This updated version looks even better and feels more functional all around. The improvements are noticeable — both in design and usability. Corsair really nailed it with this one. Great job!

Great case to build in with ease. Lots of room. Airflow is great. Front feels like a cheese grater.

Absolutely beautiful case. And super easy to build in. And I have the 7900x CPU and Asus tuf rtx 5070ti OC. And the temperatures in this case are great.

This Corsair case (model CC-9011296-WW) is a beast when it comes to airflow and space — exactly what I needed. I’m no hardcore PC builder, but the instructions were straightforward, and everything came together smoother than I expected. It’s got that clean, aggressive look and infinity rails that are just straight-up sick. The pre-installed fans? They move air like champs. Yeah, they get a little loud when I’m running Black Ops 6, but I’ll take some fan noise over watching my CPU melt down. Speaking of heat, my CPU was pushing 180°F (about 82°C) before this case. Now I’m cruising around 130°F (about 55°C) — way better. I didn’t even need to fill every fan slot. I skipped the side fan mount and it still runs cool. The anti-sag GPU support is a nice touch too — keeps that graphics card sitting like a king. Also, the tool-less design makes it super easy to open up the case and tweak things without digging around for a screwdriver. Now for the cons: • The side panel’s a bit flimsy — it bends easy, so don’t manhandle it or you’ll regret it. • Thumb screws can strip if you’re not lined up right, especially going through those second-layer panels. Take your time, do it right the first time. • Wish the fans were a little quieter, but again — performance over silence any day. Bottom line: this case brings the airflow and looks while keeping your build cool and clean. Just be gentle with the panels and watch those screws. For the price? Boss hog status. Would buy again.

Higher quality than I was expecting. Fans in the front are very quiet and the backplate gave ample room to hide the cables. It has a lot of nice feature that future proof it, like an anti-sag bar for a graphics card. I don't have a graphics card that big, but it's nice to know it would be accommodated.

First full pc build since the early 2000's... this case a done right. Everything is well made and thought out, and it all just clicks/sits in place nicely. To note though, dont be a dummy like me... the top panel.. instructions say to pull the handle and it just comes off ( like everything else ).. that is not correct.. you need to pull/edge it out of the metal support grommets, the pull the handle.. I snapped my handle and bent the metal because of that instructional oversight. Dont be me. ;)

Design is awesome! Building space is very spacious. The airfow on this thing js perfect for someone like me who is constanly checks the temperature and get paranoid over my idle m2 temps. Price is also great! Just get it if you’re contemplating this case.

Great update to the original Corsair 4000 Frame. The case has everything you'll need for a fresh build, cable management is excellent, great looking argb fans. The only thing I added is rear argb fan for even better airflow.

Bought a 50 series GPU to upgrade and realized quickly that it required a bigger case than what I was currently using at the time. Super spacious and easy to work in with my large hands this case is a breeze to use.

Clean look with plenty of space and very easy to work in. Has extra straps for cable management. Plenty of SSD slot holders and air flow is very good. It's a little tight around the power supply but just enough space to keep things neat. Highly recommend getting white RGB fans when completing this build.

If you are doing a new build, get a reverse motherboard (ASUS BTF for example) for this case. They are supported by the FRAME 4000D. All the motherboard connections are in the back on reverse motherboards so the build looks really clean. Plus this is a great case no issues with it. Corsair also sells different front panels to change the look.

This case was easy to build in. the internal structure seemed a little flimsy at first but once some things were installed it seemed to stiffen the chassis up. airflow is great. i have a 280mm AIO in the top and 120mm in the back for exhaust

Got the case for my first PC build and it was easy to work with and allow me put the PC together easily enough. I do with they included a physical manual for the box.

Amazing case for the price. Fans are amazing. Can fit 360mm radiator on top. Fits a 5070ti with three fans easily

Super good easy to build a PC built in airflow. I really love this product and for me my first PC case

This is literally the best case on the market right now in its class. Extremely easy to build in. Gorgeous! Everything can be taken apart. Absolutely excellent case.

Great build quality. Very modular and easy to get to parts that would otherwise be hard to reach. Good cable management and the ARGB fans add a nice touch.