Customer Ratings & Reviews

getting this as my 1st stand is strong solid a bit heavy ,, and the wheel is what sold me to get and are great to move the stand easily perfectly in any direction to position as i sit on sofa to play .. the stand round foot pads are almost meaningless and looks to fall off,, since i had to tilt it to assemble so it push the round pads almost off the stud bolt .. ,, so when being used , it like spikes on the floor or rug .. i may remove them all together later .. the g29 mount perfect with predrilled holes ,, my thrustmaster tmx wheel needs a hole drilled bigger to fit the stud bolt .. my x52 joystick mounts on the side with the predrilled holes ,, but need to decide how to the mount the throttle where i may just buy some metal to bolt on later .. i donna drive with the stick .. so far, , driving with solid steering wheel is a pleasure ,, since i been playing with the lap sitting wheel for decades ,, i finally broke to buy this because the force feed back wheel are not made to sit on your lap and hurts too if you do .. i also decide on this for what looked like the most solid of stands and it is ..

This driving-simulator stand is rigid enough for direct drive wheels and portable. I just swivel my living room lounge chair to face my big-screen, lock the casters on the stand and I'm temporarily transformed into a speed demon! Improvements would be retractible casters as on refrigerators to eliminate 'all' floor slippage and predrilled holes for zipties for cable management. Supplied clips were discarded and holes were drilled. I also mounted the power brick to the stand below the pedals via zipties.

Have not had time to fully set up, but so far, its been a game changer. Well worth it.

Purchased for use with Logitech racing wheel & pedals. Also have the manual shifter from Logitech but, if your chair has armrests you’ll need to remove them so your seat isn’t smashing the knob. Also, it isn’t a great fit with the manual shifter. I had to modify it a little, but overall it’s a great item and super easy to put together. It’s a high quality, heavy duty material.

This kit was clearly pre owned and had some structural damage. The assembly instructions were inconsistent and wrong in several diagrams. Assembly was easy enough after I ignored some instructions, though I'm disappointed by the build quality. The steering wheel plate mounts are very unsteady and prone to wobbling, which is exactly what you don't want in a racing sim setup.

I don't think you can get better for the money. Have a GT DD Pro mounted to it. I don't use the wheels seeing how it's easy enough to move it around when needed. This is a wheel stand, not a rig, but extremely solid. I use a decent amount of Force feedback and it barely moves, if at all. Keep the fasteners tight. No problems so far.

Sturdy, but some of the screw/throughholes don't align well, and as a result make cross-threading a real possibility. If attaching to one of the Next Level Racing chairs, I'd recommend loosening the bolts that hold the seat rails to allow for easier alignment when attaching this stand, before tightening everything back up.

Awesome stand holds up to my Fanatec DD2 well. Only complaint is the shifter side is a bit wobbly but you hardly notice it while racing or driving.

This wheel stand is very sturdy and has provisions to mount just about any manufactures wheel base and pedals. This is a great product, and is as portable as can be for a heavy duty/sturdy stand. If you can't afford or don't have the room for an 80/20 Aluminum full rig, get this. I use an adjustable desk chair and it works great.

It looked to be exactly what I was looking for, for my new upcoming sim racing wheel (Gran Turismo DD Pro by Fanatec). Unfortunately I had to exchange it because one A frame brace, which also attaches to the pedal plate AND main frame, had the m6 internal screw threading break apart and was inside that piece...most likely due to be a bit abused during shipping.

Its a good stand just for the shifter side of things its not so good needs more support

I was looking for a sturdy sim racing stand and I found it with this product.

I recently started getting into sil racing and decided to get a direct drive wheel from Fanatec. Specifically the DD1 and did some research online to see what would be the best wheel stand. My place is not big enough to get a full sim rig and with a place where I have multiple screens. I needed it to move around in different places for my consoles and PC. Well, after using it for quite some time, this is hands down a must buy! The portability is really nice, the wheelbase can stand a pretty good amount of force feedback, and it’s perfect if you’re in a situation like me where if you need something very compact this will do the job!

Excellent and solid stand for direct drive wheels.

Very sturdy stand but difficult to construct and deconstruct not nearly as portable as I would have liked

Very well constructed and sturdy everything I thought i would be and more