Customer Ratings & Reviews

Solid build quality, great looks. Pretty good cable management and ease of building in. Not the best airflow, but its a solid metal plate on the front, so to be expected. Still decent thermals with pretty hot components (5800x3d and 6900xt), but that's with lot's of experimenting with different fan setups and cooling solutions. Would build a small PC in here again.

Very nice good pc case, nice and small. Compact and very clean looking build

Good quality but there is not room for a big gpu ..

Pros: Very stylish, unique looking case. Good air flow. USB-C jack. Fits 240 or 280mm AIO CPU cooler. Fits SFX or ATX power supply. Cons: No reset button. Only 1 USB3 jack, no USB2 jacks. My motherboard USB headers are going to waste. You can never have enough USB jacks. Other: Will not accommodate the newer 2+ slot GPUs. Disappointed that the included fans did not have the red trim as pictured in sample photo 3 of the web page; they're entirely black.

Build quality is really good, but gpu temperature suffers it's has very little space to intake gpu cool. I suggest use thin Gpu for this case build. Otherwise case is okay.

The case is study and well made. It is a combination of metal and glass. It will accommodate mini ITX/DTX boards and a 240 mm radiator at the front. It is easy to build it. The glass panel is not tinted and easy to see through.

All metal and glass. Well built and adequate ventilation for an 8700k mini itx build. Case will accommodate an 240 mm radiator at the front. The case is easy to build a system in. Will accommodate itx/dtx boards. The glass is not tinted and easy to see through. The glass and front panel fit snugly and removing takes a little force. The matte black finish, unlike the white version, does show fingerprints quiet easily.

Great mini itx case. Good cable management plenty of places to hide cables. Fit a be quiet water cooler in no problems. Dual fans 240. Air flow seems good I saw a few other mention air flow problems. None here. Looks sharp!! Fit my 1070 founder edition. Since I can’t get a new GPU. Recommend for a fun itx build

Good looking case especially when it was on sale for sub $50. Do your research, this case may not fit modern gpus that go beyond 2.5 slot and 240mm aio. My 3080ti Founders Edition paired with a front radiator barely fits.

3/5 Stars due to air flow and wasted space. The front panel is solid with only air intake of the small side area on the front panel. This starves the case for air. It's a sfx case / why waste all the small on the bottom in front of the psu. I did manage however to install a 240mm aio with a push/pull set up. This helped overcome the bad air flow design and kept the cpu cool - but didn't help the gpu much. I ended up swapping this case for another after a few months.

Small and compact. Sleek design would buy again if I build another PC.

Bit big for my use-case - I was hoping for a slightly smaller case. Did not use it

Great case looks ans feels great only thing that sucks is finding the parts to put into it

I don't know if I got a bad batch, but I could not get the included screws to thread properly into the standoffs to save my life, when installing my motherboard. I cross-threaded almost every single time, and I have been building and taking apart PCs for the better part of 2 decades at this point. There was no rhyme or reason to it at all - one screw would constantly cross-thread in one standoff, but would be fine in another. I could not isolate between the standoffs or the screws but the problem seemed to follow both for me. Often times, cross-threading would require I loosen the stuck screw/standoff all the way, pull the mobo out, and remove the stuck standoff with a pair of pliers. I eventually found the magic combination to secure all four corners, but I would've saved a lot of headache if I had my own standoffs and screws to use here. I suspect it has something to do with the paint/coating used on both parts. Otherwise, the case is great. Cable management has **never** been as much of a joy as it's been with this case. Got a 1070 Strix installed with a single 120mm AIO CPU cooler in the top radiator section on the front - it's a tight fit, but it fits, and it's absolutely - *chef's kiss*.

Perfect for a simple build if you know what you need

For a simple ITX build for general PC use, this case works great for me. I’m using an Intel core i3-10100 and an MSI H510I PRO WIFI Mini ITX motherboard. The case is small enough for a corner of my desk to use for daily tasks.

Big for an ITX build but is easy to build in because of that. This case is good if you want to display your pc and are okay with below or average thermals depending if you use a SFX psu.

Bought this to build my younger brother a PC. This case is the perfect size. Just make sure the parts you are purchasing are compatible in size with this case. It is exactly like my NZXT H510 case, but smaller. I wish I got myself this case.

The case is sturdy and good but for price is not super good just becuase its so small

Love building small computers. Fits everywhere perfectly.