1-5 of 5 Answers
Loading Paper in Cassette 1 (Upper Cassette) You can load photo paper and other media in these sizes in the upper paper cassette: • 4 × 6 inches (102 × 152 mm) • 5 × 7 inches (127 × 178 mm) Note: Do not remove or insert the paper cassette during printing. 1. Raise the control panel, if necessary. 53 2. Close the output tray by pressing the Output Tray button or by hand, if necessary. 3. Open the front cover and pull out the upper cassette. Note: If the upper cassette is too far inside to reach, turn the product off and on again. 4. Slide the edge guides outward. 54 5. Set the front edge guide to the position for the paper size you are using. 6. Insert paper with the glossy or printable side facedown. Note: Make sure the paper is loaded against the front edge guide and not overlapping the rear of the cassette. 7. Slide the side edge guides against the paper, but not too tightly. Note: Make sure the paper is under the tabs on the edge guides. 55 8. Keep the cassette flat as you insert it until the arrow marks on the tray and product line up. 9. If prompted by the product's LCD screen, select the size and type of the paper you loaded, and select Done. Note: The output tray opens automatically when you print. Always follow these paper loading guidelines: • Load only the recommended number of sheets. • Load paper short edge first and printable side down. • Make sure the paper is under the tabs on the edge guides and not sticking out from the end of the cassette. • Check the paper package for any additional loading instructions. Parent topic: Loading Paper Related references Paper Loading Capacity Related tasks Loading Paper in Cassette 2 (Lower Cassette) Loading Paper in the Rear Paper Feed Slot Loading Envelopes 56 Loading Paper in Cassette 2 (Lower Cassette) You can load paper up to this size in the lower paper cassette: Legal (8.5 × 14 inches [216 × 356 mm]). Note: Do not remove or insert the paper cassette during printing. 1. Raise the control panel, if necessary. 2. Close the output tray by selecting Output Tray or by hand, if necessary. 57 3. Open the front cover and pull on it to remove the lower cassette. 4. Slide the edge guides outward. Note: If you are using legal-size paper, remove the CD/DVD tray from the bottom of the lower cassette. Press the button on the lower cassette and then extend it as shown. 58 5. Set the front edge guide to the paper size you are using. 6. Insert paper with the glossy or printable side facedown. Note: Make sure the paper is loaded against the edge guide and not sticking out from the end of the cassette. 59 7. Slide the side edge guides against the paper, but not too tightly. Note: Make sure the paper is under the tabs on the edge guides. 8. Keep the cassette flat as you insert it. 9. If prompted by the product's LCD screen, select the size and type of the paper you loaded, and select Done. Note: The output tray opens automatically when you print. Leave enough space in front of the product for the paper to be fully ejected.
Sorry, there was a problem. Please try again later.tray is quite close to bottom on front side of printer. just slides out . Always encourage youtube search to visualize what you must do. Photo paper simply drops into rear tray.
Sorry, there was a problem. Please try again later.There is a tray on the bottom front with arrows on it. Push it in and then pull it out. Load the paper and then push the tray in slowly until it clicks in secured. I hope this helps.
Sorry, there was a problem. Please try again later.pull out the bottom drawer--load only 30 sheets
Sorry, there was a problem. Please try again later.pull out paper tray in bottom front of printer
Sorry, there was a problem. Please try again later.