“How do the sensors control each room’s temperature if you don’t have a zoned system?”
Answer This Question
1-4 of 4 Answers
The system lets you decide which sensor(s) determine when the heating or cooling turns on/off for the whole house. For example, if you have the main thermostat (living room), a sensor in your master bedroom and one in the kitchen, you can tell the system ('prioritizing') to only consider the master bedroom's temperature when deciding if to heat or cool the house. So at night if you want to maintain a temperature of 72degs in your master bedroom, the system will turn on the heat or cool to maintain the temperature in the master bedroom. The temperatures in the other rooms will now be dependent on the master bedrooms temperature, so those other rooms may run hotter or cooler depending on your home. With multiple sensors you can see the temperatures in the others rooms (that have sensors). You can also prioritize multiple rooms. So you can tell the system to main the temperature in the house based on the temperatures in the master bedroom and the kitchen or living room and kitchen, etc. I have been using the system for a few weeks now and it is working great. I actually bought some additional sensors for my home.
Sorry, there was a problem. Please try again later.The thermostat controls a single system so it is either cooling or heating all zones at the same time. The remote sensors allow you to measure and control an area that may not be near the thermostat. In my home my son's room has three vents. So the temperature changes rapidly in his room when compared to the hallway where that floor's thermostat is located. Especially if his door is closed. I have a remote sensor in his room and it is the preferred sensor. His room stays perfect now and my unit runs half as much.
Sorry, there was a problem. Please try again later.T9 thermostat uses 2 different settings to regulate room temperature. You can choose the rooms for heat/cool or you can choose the Active rooms option. Active rooms option uses the wi-fi sensors that determines to heat/cool the particular room
Sorry, there was a problem. Please try again later.An average of all sensors selected as priority will be used to get as closer as possible thi the desired temperature.
Sorry, there was a problem. Please try again later.