A:AnswerThis HP e-All-in-One Printer can be connected to USB on one PC and wirelessly to another because USB is not a network it is a direct connection. You would not be able to connect two networks connections like an Ethernet and Wireless.
A:AnswerYou will go to the website given to you on the printer directions and download the driver to your computer. Follow the directions and you are done. It was extremely easy to do. I am not a computer wizard and figured it out.
A:AnswerUse the single-cartridge mode to operate the HP ENVY 4500 series with only one ink cartridge. The
single-cartridge mode is initiated when an ink cartridge is removed from the ink cartridge carriage. Exit single-cartridge mode: ? Install both the black and tri-color cartridges in the HP ENVY 4500 series to exit single-cartridge mode.
A:AnswerThis printer is not sold with the USB cord included; you will have to buy that separately if you wish to have a USB connection. However, the printer does connect to a wireless network so you can print without a USB connection if you have a wireless network.
A:AnswerPrint, Properties, Paper quality tab, Advanced tab, Under document Options & Print in Grayscale click Off, choose black Ink only or high quality grayscale, click OK, OK, OK.
A:AnswerNo. But they did get 1 out of 3 right.
Height is not 15.4 inches but is 5.4 inches.
Width is correct - 17.5 inches.
Depth is not 23.9 inches but is 13.9 inches (with door open in front).
A:AnswerThese numbers are measured : 17.5" W x13" D x 5" H the tray drawer sticks out approx. 1.75" from the total depth when completely pushed in. When pulled out to load paper in sticks out approx. 7" from the total depth. Hope this helps.
